05-11-2012 02:22 AM - edited 03-16-2019 11:06 AM
Hello,
I have a question regarding when CM make a request to Active Directory and use by default the account's fields: 'Name', 'TelephoneNumber'. Can I change that CM will be able to use the another account's fields in the AD?
Thanks!
Solved! Go to Solution.
05-11-2012 02:33 AM
Hi
For Telephone Number, you can use telephoneNumber or ipPhone.
'Name' isn't a field - you have sn, givenname (i.e. last name and firstname in CUCM) and these aren't negotiable.
If you are talking about userid, that's changeable but there are a lot of caveats with doing that.
You should read this and then come back with any questions: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/directry.html
Regards
Principal Engineer at Logicalis UK
Please rate helpful posts...
05-11-2012 02:37 AM
Hi,
Have a read at this link
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_1/ccmcfg/b02ldsys.html#wpxref72074
There are many attributes that you can use
Regards,
Alex.
Please rate useful posts.
05-11-2012 02:33 AM
Hi
For Telephone Number, you can use telephoneNumber or ipPhone.
'Name' isn't a field - you have sn, givenname (i.e. last name and firstname in CUCM) and these aren't negotiable.
If you are talking about userid, that's changeable but there are a lot of caveats with doing that.
You should read this and then come back with any questions: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/directry.html
Regards
Principal Engineer at Logicalis UK
Please rate helpful posts...
05-11-2012 02:37 AM
Hi,
Have a read at this link
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_1/ccmcfg/b02ldsys.html#wpxref72074
There are many attributes that you can use
Regards,
Alex.
Please rate useful posts.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: