05-29-2008 11:31 AM - edited 03-15-2019 10:57 AM
Hi,
environment is a 6.1 cluster utilizing a PRI for calls, mgcp controlled from router. Issue is when a call outbound is placed it shows the office name and number in caller id. The number is not the problem it is the business name that we want to get rid of. Is their a way to do this on ccm?
Cheers.
05-29-2008 12:40 PM
The caller ID name is not being sent from CCM, but is being presented by the telco of the recipient of the call. They do a database lookup based on the calling number to determine the name to display. In this case, you would need to contact your providor to get them to make your name unlisted or change it to something different. Once they update their database, it will propogate to other providors.
Hope this helps. If so, please rate the post.
Brandon
05-29-2008 12:56 PM
bbuffin,
So their is nothing I can do on the callmanager to supress this?
Thanks!
05-29-2008 12:57 PM
No, as it is not being produced by CCM.
Brandon
05-29-2008 01:04 PM
Gotcha!
Thank you very much for your input, its appreciated.
Cheers.
05-29-2008 01:29 PM
The Caller ID is controlled on his line settings parameter. He does not have to pay to have his caller ID blocked, he can just drop it in Dial Peer.
dial-peer voice 1000 pots
destination-pattern 8T
clid restrict
port 0/1/0:15
Can't that be done? -
Royce Lindsey
CCVP | CCDP | ACE | JNCIP | MCSE | 3RP
05-29-2008 01:17 PM
I agree and disagree with the others. Yes the CLID is a function of the LEC, but you have control of it from your line settings.
You can put the below line in to block ALL CLID outbound for that shared line
>>>dial-peer voice 1000 pots
>>>destination-pattern 8T
clid restrict
>>>port 0/1/0:15
If this is works for you please rate my answer.
Cheers,
Royce Lindsey, CCVP
05-29-2008 02:27 PM
Okay since you have a PRI, you are controlling the CLID and CLIN you cannot do a peer to block FXO since the telco does handle that part unless you do a *67 in the outbound pattern.
On a Pots PEER-
Only external calls
>dial-peer voice 10 pots
>clid strip - to block only the number
>clid strip name - to block only the name
To send only caller name
telephony-service
caller-id name-only
To block caller id on a call by call basis
>telephony-service
>caller-id block code *67
05-30-2008 04:32 AM
According to the original poster, they are using MGCP, so any configuration under a dial peer would not be relevant. Also, they are using CUCM, so any configuration under "telephony-service" would also not be relevant as this is configuration for CME.
Brandon
05-30-2008 05:59 AM
Hey Guys,
I have seen this before and in our neck of the woods you have to pay $$ for full Name/Number display on PRI's. The default if you don't add the extra functionality is for the Telco provider to populate all Outgoing calls with the Corporate Name and Number. Brandon +5 points for this assessment. Royce +5 points for your good answers as well (I think you probably just missed the MGCP reference :)
Take care,
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide