04-04-2017 03:43 AM - edited 03-17-2019 09:59 AM
Hello,
how do I enable a normal ccm end user to update his BLF SD over CCM End User WebUI?
Updating SD works.
CUCM 9.1
CP-8851 with 1 BEKEM
04-04-2017 05:53 AM
Unfortunately ASAIK you cannot, Cisco for no good reason has not allowed ability for end users to adjust BLFs via self care portal, only traditional speed dials.
04-04-2017 06:31 AM
Hi Thomas,
Just thought I would add this reference to the great tips from my friend Chris (+5 "Chris")
Unified CM supports the ability for a speed dial to have presence capabilities by means of a busy lamp field (BLF) speed dial. BLF speed dials work as both a speed dial and a presence indicator. However, only the system administrator can configure a BLF speed dial; a system user is not allowed to configure a BLF speed dial.
From the CUCM 8.x SRND;
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/8x/presence.html#wp1084090
Cheers!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide