04-09-2009 03:19 AM - edited 03-15-2019 05:23 PM
Need to be able to use the paging system on a Siemens PBX. Siemens phones dial 6 then 8 digits. Is it possible to seize a trunk from an IP phone on CCM5.1 on a Siemens PBX? I know the access code (6)and have configured a Route Pattern of 6 and 6XXXXXXXX - no joy.
Any ideas?
Rich
04-09-2009 03:27 AM
How are you connecting to the PBX? Most likely you will need to look at debug isdn q931.
04-09-2009 03:37 AM
Its an MGCP GW connected to PBX via QSIG. The digits get to Siemens PBX but in one long string. Not sure if its possible to sieze the trunk by dialling 6 from an IP phone or if introducing a delay might help somehow?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide