04-23-2013 08:03 PM - edited 03-16-2019 04:58 PM
Hi Guys,
We are using Cisco 2921 router with universal image and uck9 license. We have configured the device to push the cdr files to the ftp server.
gw-accounting file
primary ftp ipaddress/dev/can/cdr username xxxxx password 7 xxxxx
I can see the cdr files on the device flash. But not on the ftp server.
router#sh flash | i cdr
37 9440 Jul 26 2012 09:56:00 +08:00 cdr.can-rtr-1.07_26_2012_09_56_00.702
74 258202 Apr 4 2013 12:34:04 +08:00 cdr.router.04_04_2013_11_04_03.754
75 734400 Apr 5 2013 12:34:04 +08:00 cdr.router.04_04_2013_13_01_15.429
76 1167124 Apr 6 2013 12:34:04 +08:00 cdr.router.04_05_2013_12_55_58.952
77 128766 Apr 7 2013 12:34:04 +08:00 cdr.router.04_06_2013_13_25_06.846
78 881012 Apr 8 2013 12:34:04 +08:00 cdr.router.04_07_2013_13_34_05.041
79 1474428 Apr 9 2013 12:34:04 +08:00 cdr.router.04_08_2013_12_48_17.370
181 1367854 Apr 10 2013 12:34:04 +08:00 cdr.router.04_09_2013_12_40_52.828
182 81086 Apr 10 2013 12:57:42 +08:00 cdr.router.04_10_2013_12_41_50.908
It works if i manaully copy from the router to the ftp user.
Any assistance. Much appreciated.
Thanks
Nachi
04-23-2013 11:08 PM
Hi Nachi,
Was this working setup or fresh installation?
Can u share the ouput of following commands:
a. show version
b. show running -config
regds,
aman
04-26-2013 01:25 AM
Hi Aman
This is a working setup. It stopped working suddenly. We have not changed anything in the configuration.
Show version:
---------------------
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(3)T1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Wed 13-Jun-12 14:24 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M12, RELEASE SOFTWARE (fc1)
router uptime is 2 weeks, 1 hour, 46 minutes
System returned to ROM by reload
System restarted at 13:48:48 AWST Wed Apr 10 2013
System image file is "flash0:c2900-universalk9-mz.SPA.152-3.T1.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
Cisco CISCO2921/K9 (revision 1.0) with 2576320K/45056K bytes of memory.
Processor board ID xxxxxxxxx
4 Gigabit Ethernet interfaces
11 Serial interfaces
4 terminal lines
1 Channelized E1/PRI port
1 Virtual Private Network (VPN) Module
8 Voice FXS interfaces
2 Cellular interfaces
1 Services Module (SM) with Services Ready Engine (SRE)
Cisco Unity Express 8.6.1 in slot/sub-slot 1/0
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
1000944K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO2921/K9 xxxxxx
Technology Package License Information for Module:'c2900'
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
uc uck9 Permanent uck9
data None None None
Configuration register is 0x2102
04-26-2013 01:42 AM
Hi Nachi,
Is ftp service working on server?
Which third party server is deployed? After u deploy the application on PC/Server used for recieving CDR, there would be application related service.Is that working?
regds,
aman
04-26-2013 02:00 AM
Hi Aman,
FTP server is working. I can push the files to the ftp server using copy command from the router.
Since the server is not under our control, I am not sure about the third party server platform and the application running on the server. What sort of application are you referring to ? I can try to find it out.
Thanks
Nachi
04-26-2013 02:08 AM
Hi Nachi,
What I understand is that u are transferring the CDR raw data from router to FTP server where u are running the third party software for customizing the reports ?
I am referring to that 3rd party s/w?
If it is not so, then, how u are analysing the CDR files.
regds,
aman
04-26-2013 02:15 AM
Hi Aman,
Thank you for your response.
I will find out how the CDR files are anlaysed. But my problem is the cdr files on the router flash is not automatically getting transferred to the ftp server. Is that somehow related to the third party software related to customizing the report. Is the third party software initiating the transfer.
Thanks
Nachi
04-26-2013 02:35 AM
Hi NAchi,
As u have said that u are able to manual copy the files from router flash to that server but ftp is not working.
There has to be some handshake between router and server to fetch the files.On which OS platform , application is installed.
Just cross-check and let me know.
Customizing the report is a secondary part since first we need to push the files from Router flash.
In the meantime,you can also run debug ip ftp on router to troubleshoot further.
regds,
aman
04-29-2013 07:28 PM
Hi Aman,
The server is running standard FTP client. No other third party software. The router initiates handshake process to the ftp client. Then it tries to copy cdr file to the ftp, since it fails it write the cdr files to the flash.
Then, I am manually able to copy from the flash to the ftp.
Thanks
Nachi
04-26-2013 02:39 AM
Hi Nachi.
Please activate the following debug.
debug voip fileacct
debug voip dump-file-acct
Give the command: file-acct flush without-close
And post the output.
THX
Regards
Carlo
Please rate all helpful posts
"The more you help the more you learn"
04-29-2013 07:31 PM
Hi Nachi,
Can u initiate the debug as suggested by Mr. Carlo and debug ip ftp so that we can troubleshoot further?
regds,
aman
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide