CDR Reports Issue

[opnineopnine]

Hello,

I have CDR with my cucm 10.5, the issue is I have 2 E1 and I would like to know how I can configure the CDR to give me the report to what E1 is the calling connected.

Thanks. 

[kinman-wong]

If you are using MGCP, the CDR should have the indication which E1 making the call.

[opnineopnine]

Hello kinman-wong

Im now using mgcp al goes via sccp.

thanks.

[Marcelo Morais · Accepted solution]

Hi opnineopnine,

 when you configure a gateway using SCCP, this info appears in CDR as SKIGW<last 10 characters of MAC> and with Module and Slot info that you configure in CUCM ... check your CDR for that info.

Hope this helps.

[opnineopnine]

Marcelo,

Is there any software that you can recommend to read the output?

thanks. 

[Marcelo Morais]

Hi opnineopnine,

 although CUCM has a tool called CAR (check this link), I prefer to use Excel to read the CDR for this kind of things (like a quick look in one of its data).

 The CUCM's CDR is in a .CSV format.

Hope this helps.