CFA to PSTN, how to release the call from gateway?

[cjrchoi11]

-CUCM6.1

-SRST router with FXO lines. h323

Under voice-port, configure the target number '91800xxxyyyy' and let the incoming call back to PSTN

Q)is there any feature to release the call from SRST router?

Thanks in advance,

[paolo bevilacqua]

Short of shut/no shut the voice-port, there's no way. There is also a"clear voice call" command, but it's broken in most IOS versions.

[cjrchoi11]

I may not explained clearly.

the incoming call forwarded to 1800 (PSTN) in SRST router but the call still stay in SRST router until hang-up and also occupy two FXO lines.

Is there any way to release from SRST router after the incoming call forwared to 1800(PSTN)?

Thanks,

John

[paolo bevilacqua]

If you configure CFA at router level, it is normal that each call will take two lines.

If you want CFA not to take any line, configure it at telco level.