05-20-2016 03:34 PM - edited 03-17-2019 06:59 AM
Hi,
I tried to change cluster ID but it defaults back to "StandAloneCluster" if I reload the page. Running CUCM 10.5
Have anyone seen this and why is this happening? What am I doing wrong?
thanks,
Alex
Solved! Go to Solution.
05-20-2016 04:18 PM
Ok, this seems to be a defect: CSCut23185
try with the workaround mentioned in the bug:
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCut23185/?reffering_site=dumpcr
05-20-2016 04:01 PM
if you are talking about the suggested value on enterprise parameter, then it wont change on changing the cluster ID. suggested values are default settings you can role back to.
Parameter Name | Parameter Value | Suggested Value |
---|---|---|
xxxxxxxx | StandAloneCluster |
while configuring the "Intercluster Lookup Service Configuration" you can change the server role from standalone to Hub etc.
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_0_1/ccmfeat/CUCM_BK_CEF0C471_00_cucm-features-services-guide-90/CUCM_BK_CEF0C471_00_cucm-features-and-services-guide_chapter_011111.html
05-20-2016 04:06 PM
Hi.
i am changing the parameter value, click save. Then next time I load the page, parameter value is set back to StandAloneCluster.
hope this explains better what is happening.
-Alex
05-20-2016 04:18 PM
Ok, this seems to be a defect: CSCut23185
try with the workaround mentioned in the bug:
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCut23185/?reffering_site=dumpcr
05-20-2016 04:31 PM
Looks like I do not have access to that link.
can you share the details?
thanks.
05-20-2016 04:41 PM
please reach out to cisco TAC to get the workaround/fix
05-20-2016 04:41 PM
Thank you!
Will try this.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide