07-06-2013 09:40 PM - edited 03-16-2019 06:15 PM
Hello,
Does anybody know if there's any guide showing the procedure to change CUCM IP address on a presence server.
CUCM IP address has to change and therefore we need to change it on presence server.
Regards,
Sent from Cisco Technical Support iPhone App
Solved! Go to Solution.
07-07-2013 12:11 PM
Correct, simply change all configuration pointing to old CUCM, i.e. presence GW, TFTP, etc.
HTH,
Chris
07-06-2013 11:17 PM
Hi Daniel,
What are the versions u are using for CUCM and CUPS?
regds,
aman
07-07-2013 09:21 AM
We are using CUCM 8.6.2 and Presence 8.6.4.
Just to confirm, I don't want to change the IP address of the presence server itself, what I need to do is to change the IP address of CUCM configured on this presence server, I mean, it will affect the current integration.
I assume I would need to change gateway, TFTP, etc. but I just want to make sure I do it the right way so I don't cause any DB issues or something worse.
Sent from Cisco Technical Support iPhone App
07-07-2013 12:11 PM
Correct, simply change all configuration pointing to old CUCM, i.e. presence GW, TFTP, etc.
HTH,
Chris
07-11-2013 08:00 AM
Thank you Chris,
I was concerned about causing issues because of this change. In the end, it not as sensitive as changing the IP address of the server itself.
Regards,
07-07-2013 07:20 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide