IP Telephony and Phones

I have an irritating issue with 7925G phones registered to CUCM 7.1.3.30000-1When you dial for an outside line we have a route pattern set for 9.@ to use the PSTN gatewaySo users dial 901234567890 and it dials fine. Although after it starts dialing y...

Please add what is missing in the subsystems listed below.FXO SSMFXS SSMVPMDSPRMDSPHTSPTSPVTSPCCAPI

Hi All,Good Morning. We are facing a default router issue in the Cisco IP Phones in our new setup. We are not getting the default router when DHCP is enabled due to which phone is not getting registered in the call manager (Version 8.5.1 SU1). We hav...

Trying to fix 7965G IP Phones that went dead - Read a million treads and making a last effort to fix the problem(1) Download tftpd32 and install on PC. (2) Enabled DHCP server from settings button.(3) In the DHCP options field put 150 and the PC's ad...

Hi,A customer has a running CUCM 7.1 system with 1200 x 7962 Phones and  now wants to migrate to 9.1. Problem is, that only half of the DLUs belong them. The other DLUs are own of the current supplier in a kind of a hosted model.Is is now possible to...

I’ve problem with TCL script & auto attendant service. I have Cisco 2801 ISR with CME. When I configure BACD with AA service it starts working well for the first time. Welcome message in .au file is played and DTMF allow to select internal phone numb...

Dear All,I am struggling to configure CIPC work over Remote ACCESS IPSEC VPN tunnel, after successfully connecting my laptop thru vpn client am able to ping all the host and CUCM server IP. When I start CIPC it gets registered with CUCM and am able t...

hi i have installed the CME 9.1 and when i go to browseri type the IP-ADDRESS/ccme.html i entre the login and password then i have the browser emplty page regards.                  

Hello,I have a router in H.323 mode, with SRST configured. I am using B-ACD 2.1.2.2. I changed many IOS versions but the result is the same:the script is running until the moment when it must play the audio prompts. I can see "TCL AA: ++ Playing Welc...

Hello All,Just need a nudge in the right direction please.  I have Call Manager Ver 7.1.5 with NTP setup under phone NTP reference the source being a router onsite.  The 9971 SIP phones are fine and receiving the correct NTP time but the SCCP 7925g h...

Hi Guys,I have here in this case a business edition 3000 with a sip trunk to CUBE.I had to configuire BACD to meet the requirements of the customer which BE3000 does not support.The trunk is configured on BE to send the call to CUBE IP address if som...

I am are trying to upgrade CallManager from version 6.0.1 to version 7.0(2a)Su3. I downloaded the software from Cisco website, and merged the 2 upgrade files, and checked the MD5 checksum.After putting the local DVD inside the server the DVD came out...