In my original post I had changed the password letters/numbers however, I have removed the entery all together now.
The config on the system has not been touched or changed. It's been the same it has since it was first set up. How do I confirm number of channels this circuit is configured for?
Below are responses from all the commands you suggested:
pxrouter>show version
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M4, REL
EASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Thu 28-Oct-10 18:32 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)
pxrouter uptime is 2 years, 2 weeks, 6 days, 1 hour, 14 minutes
System returned to ROM by power-on
System restarted at 13:28:21 BST Thu Jul 20 2017
System image file is "flash0:c2900-universalk9-mz.SPA.150-1.M4.bin"
Last reload type: Normal Reload
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco CISCO2911/K9 (revision 1.0) with 479232K/45056K bytes of memory.
Processor board ID FCZ1504740K
3 Gigabit Ethernet interfaces
31 Serial interfaces
1 Channelized E1/PRI port
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
248472K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO2911/K9 FCZXXXXXXXXX
Technology Package License Information for Module:'c2900'
----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
-----------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security None None None
uc uck9 Permanent uck9
data None None None
Configuration register is 0x2102
pxrouter>show inventory
NAME: "CISCO2911/K9 chassis", DESCR: "CISCO2911/K9 c
PID: CISCO2911/K9 , VID: V02 , SN: FXXXXXXXXXXX
NAME: "VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multiflex Tru
0", DESCR: "VWIC2-1MFT-T1/E1 - 1-Port RJ-48 Multifl
PID: VWIC2-1MFT-T1/E1 , VID: V01 , SN: FXXXXXXXXXXX
pxrouter>show controller E1
E1 0/0/0 is down.
Applique type is Channelized E1 - balanced
Transmitter is sending remote alarm.
Receiver is getting AIS.
alarm-trigger is not set
Version info Firmware: 20100222, FPGA: 13, spm_count = 0
Framing is CRC4, Line Code is HDB3, Clock Source is Line.
Data in current interval (153 seconds elapsed):
0 Line Code Violations, 0 Path Code Violations
0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 153 Unavail Secs
Total Data (last 24 hours)
2369 Line Code Violations, 18 Path Code Violations,
2 Slip Secs, 1 Fr Loss Secs, 2 Line Err Secs, 0 Degraded Mins,
2 Errored Secs, 0 Bursty Err Secs, 1 Severely Err Secs, 86352 Unavail Secs
pxrouter>show isdn service
PRI Channel Statistics:
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 0. Layer 3 output may not appl
y
ISDN Se0/0/0:15, Channel [1-31]
Configured Isdn Interface (dsl) 0
Channel State (0=Idle 1=Proposed 2=Busy 3=Reserved 4=Restart 5=Maint_Pend)
Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
State : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Service State (0=Inservice 1=Maint 2=Outofservice 8=MaintPend 9=OOSPend)
Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
State : 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
pxrouter>show ccm-manager
MGCP Domain Name: pxrouter
Priority Status Host
============================================================
Primary Registered 10.XXX.XX.X
First Backup Backup Ready 10.XXX.XX.X
Second Backup None
Current active Call Manager: 10.XXX.XX.X
Backhaul/Redundant link port: 2428
Failover Interval: 30 seconds
Keepalive Interval: 15 seconds
Last keepalive sent: 14:55:04 BST Aug 9 2019 (elapsed time: 00:00:03)
Last MGCP traffic time: 14:55:04 BST Aug 9 2019 (elapsed time: 00:00:03)
Last failover time: 23:02:02 BST Jul 23 2018 from (10.193.12.6)
Last switchback time: 23:02:32 BST Jul 23 2018 from (10.193.12.5)
Switchback mode: Graceful
MGCP Fallback mode: Not Selected
Last MGCP Fallback start time: None
Last MGCP Fallback end time: None
MGCP Download Tones: Disabled
TFTP retry count to shut Ports: 2
Backhaul Link info:
Link Protocol: TCP
Remote Port Number: 2428
Remote IP Address: 10.XXX.XX.X
Current Link State: OPEN
Statistics:
Packets recvd: 372264
Recv failures: 0
Packets xmitted: 410432
Xmit failures: 0
PRI Ports being backhauled:
Slot 0, VIC 0, port 0
Configuration Auto-Download Information
=======================================
Current version-id: 1389010238-6e6580f9-93e4-42f5-aad4-0a34802cd98a
Last config-downloaded:00:00:00
Current state: Waiting for commands
Configuration Download statistics:
Download Attempted : 17
Download Successful : 17
Download Failed : 0
TFTP Download Failed : 3
Configuration Attempted : 5
Configuration Successful : 5
Configuration Failed(Parsing): 0
Configuration Failed(config) : 0
Last config download command: New Registration
FAX mode: cisco
Configuration Error History:
no network-clock-participate wic 0
end
