Cisco 8800 IP Phone Speakerphone Issue

Joshua Fontenot · ‎08-06-2015

Just want to create a post to see if anyone else has noticed this issue.

Issue #1: Audio quality out of the speakerphone of 8800 series phone is noticeably worse than 7900 phones.

Issue#2: I am having users report of a popping/crackling noise during calls out of the speakerphone. I have also experienced this myself on my 8861 phone.

Issue#3: There is a subtle buzz/vibration noise coming from the speakerphone when going off-hook and just listening to the dial tone of 8800 phone.

I suspect that there is a hardware issue with the actual speaker of the speakerphone of the 8800 series phone. I have 8851 and 8861 phones deployed and have had this reported on both models.

See attachment of what the popping noise actually sounds like which I recorded with an iPhone while it was occurring on my 8861 phone.

The popping noise is pure random and I am unable to reproduce it on demand.

I am currently running sip88xx.10-3-1-20 and UCM 10.5.1.11900-13

Joshua Fontenot · ‎08-06-2015

Related Bug IDs:

CSCut99023

CSCuo99182

CSCut78243

toormehdi · ‎09-03-2015

Hi Joshua. We are running into same issue with 8851 on a large scale deployment. Was cisco able to give you another firmware. It says v11 but it isn't posted on CCO

bradbreaux · ‎09-04-2015

Toormehdi, We sent 4 of our phones off to Cisco. 2 went to China and the other 2 went to California. We actually had our sales engineer and a Cisco Telephony TME witness the issue firsthand and replicated it on their equipment. We still have not heard anything back from Cisco on this issue. We have 400 brand new 8851s sitting in boxes until they figure this out. Should have just stayed with our trusty 7945s.

Jeff Venier · ‎09-22-2015

Any update on this thread? Just purchased a few hundred of these phones, and worried after reading this. Was there a firmware fix for this or hardware related?

toormehdi · ‎09-23-2015

Hi Jeff,

Yes after a bit of escalation, we were able to get the fix in 10.3.1.ES8

Since ES are not publicly available for download, you will need to open up a TAC case.

We have pushed the firmware to few phones as of yesterday and will be monitoring/testing for a week.

HTH

Thanks

Jeff Venier · ‎09-23-2015

Thank you for the quick responses.. please keep me updated on how it works out and if it resolves the issue.

Wilson Samuel · ‎09-28-2015

I just deployed around 300 phones for a customer (8800) and no noticeable voice quality issues whatsoever.

However I did notice, intermittent phones getting stuck issues (whenever the configuration is applied) and the phone gets stuck under "Registering" mode till someone physically unplugs and plugs the cable back in.

Regards

jeffkelso · ‎09-24-2015

Hello,

We too are experiencing the same crackling issue with our 8800 series phones. We are opening a ticket to obtain the listed firmware today. I will follow up with our results.

Thanks for the leg work!

Jeff

jeffkelso · ‎09-29-2015

I loaded the new firmware last week and waited over the weekend. So far so good on the crackling issue. I'm now preparing to push it to 500 additional phones.

As for the buzzing sound that some are referencing, I don't really notice this issue. My ear cannot detect any difference in the wav files attached above. My only issue was the crackling, and I'm pretty close to reporting success on that issue.

-Jeff

Jeff Venier · ‎11-21-2015

Did the ES firmware resolve the issue? I just received it from TAC and don't want to waste my time if it doesn't resolve.

jeffkelso · ‎11-21-2015

It did work on all phones. I was also pleasantly surprised by how much faster the 8800's upgraded compared with the 7900 series phones.

Jeff Venier · ‎11-21-2015

Thank you for the feedback.. we will try the same as well. I don't understand how Cisco hasn't made this part of the latest firmware release. I would think this would be a widespread issue that would warrant this..

bradbreaux · ‎09-23-2015

Firmware loaded on phone yesterday and no popping since, but it is very sporadic in the issue arising. We will not consider it resolved until we have more time to evaluate. The audio quality on the speaker phone is still no good. The wideband codec seems to help a bit, but at g.711 the 7945s sounds way better.

Joshua Fontenot · ‎09-04-2015

toormehdi,

Still no solution. As the other user posted we have sent off some of our phones to Cisco engineers to investigate.

I highly recommend you open a TAC case. Feel free to reference my case SR 635500743.