cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2009
Views
5
Helpful
2
Replies

Cisco 8821 IP Phone Fast Track Setup in CME 11.6

James McMichael
Level 1
Level 1

Hello Everyone,

I am trying to get a Cisco 8821 IP Phone to register with a Cisco 2951 ISR running 15.6(3)M1, which gives me CME 11.6.

The Cisco 8821 can only be registered via Fast Track in CME as full support isn't currently in the platform. The problem I have is that whilst I can get the phone to download it's firmware, and retrieve it's SEP007686CEB212.cnf configuration file, it doesn't try to register with the platform.

The following is my configuration:

tftp-server flash:dtblob8821.HE-01-005.sbn
tftp-server flash:fbi8821.HE-01-008.sbn
tftp-server flash:kern8821.11-0-3-6.sbn
tftp-server flash:rootfs8821.11-0-3-6.sbn
tftp-server flash:sb28821.HE-01-019.sbn
tftp-server flash:sip8821.11-0-3-6.loads
tftp-server flash:vc48821.11-0-3-6.sbn

!

voice service voip

 ip address trusted list
  ipv4 0.0.0.0 0.0.0.0

 allow-connections sip to sip

 sip

  registrar server expires max 1200 min 300

!

voice-class codec 1

 codec preference 1 g711ulaw

 codec preference 2 g711alaw

!

voice register pool-type 8821

xml-config maxNumCalls 2

xml-config busyTrigger 1

transport tcp

phoneload-support

num-lines 1

description Cisco IP Phone 8821

reference-pooltype 9971

!

voice register global

 mode cme

 source-address 192.168.1.1 port 5060

 max-dn 500

 max-pool 150

 load 8821 sip8821.11-0-3-6.loads

 authenticate register

 authenticate realm all

 timezone 22 

 voicemail 8000

 tftp-path flash:

 auto-register

!

voice register dn  116

 number 7027

 pickup-group 8618

 name Production

 call-forward b2bua busy 8618

 call-forward b2bua noan 8618 timeout 45

!

voice register pool  3

 id mac 0076.86CE.B212

 type 8821

 number 1 dn 116

 dtmf-relay sip-notify

 session-transport tcp

 username 8821-3 password cisco

 voice-class codec 1

 no vad

!

voice register global

 create profile

As far as I can see, the handset can get the generated configuration file and it takes the password set under the username/password section of it's config so it is taking some bits of the config. It doesn't ever set it's line though, that remains greyed out on the phone.

From the handset I can see it complain about not being able to download the locale file, but I'm hoping this isn't an issue.

Has anyone managed to get an 8821 registered on CME?

Cheers,

James

1 Accepted Solution

Accepted Solutions

Hi James,

Can you add bind command under voice service voip > sip > bind.

Also, please share the output of 'debug ccsip message' to see what errors are taking place during registration.

View solution in original post

2 Replies 2

Hi James,

Can you add bind command under voice service voip > sip > bind.

Also, please share the output of 'debug ccsip message' to see what errors are taking place during registration.

James McMichael
Level 1
Level 1

Thanks Mohammed, you had the right idea. Turns out the loopback interface that the customer had bound the media and signalling to was non-routeable from the voice VLAN.

Rebound now to a valid interface and the handset has registered without issue. For some reason I can't see your comment to mark it as correct, but trust me you were right.