10-27-2016 04:36 AM - edited 03-17-2019 08:30 AM
Hi all,
Who has already implemented the Cisco 8821 with CME 11.0 or 10.5?
Fast Track Mode for CME10.5. What about CME11.0?
Thanks,
Norbert
11-03-2016 07:14 AM
Hi Norbert,
We have BE6000 10.5 and we are looking for Cisco 8821 phones to deploy...
...but it is now 2 months we are desperately looking for such a phone !
How did you get yours ?
Cheers,
olivier
11-03-2016 08:54 AM
Not sure if you're trying to get a hold of the actual device, or that you cannot configure it on CUCM.
11-03-2016 09:15 AM
Hi Olivier
We have ordered but not received them yet.
But as the 7925G is EOS I have to figure out if the 8821 can be deployed on CME.
Greets,
Norbert
11-05-2016 11:57 PM
Hi Norbert,
Yes, you can deploy 8821 with CME 11.X.
For ISR G2 (29XX/39XX) or ISRG3 ( 43XX/44XX) router - This phone model is not officially supported yet but can be registered using Fast Track method and will support only basic features.
Sample configuration to register using Fast Track method:
voice register pool-type 8821
phoneload-support
reference-pooltype 9971
voice register dn 10
number 8000
voice register pool 10
id mac 1111.2222.3333 [ Mac address of the phone ]
type 8821
number 1 dn 10
username cisco password cisco
voice register global
create profile
-- Please mark the post as answered if it helps.
Regards,
Hitesh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide