09-15-2011 07:05 AM - edited 03-16-2019 07:00 AM
Hello,
Is it possible to get IPv6 enabled on the 9971, 9951 and 89xx SIP IP phones?
I can not find the option in the network configuration on the phone.
thanks
09-15-2011 12:54 PM
AFAIK no SIP phones support IPv6 today.
This should be on the roadmap but will not be immediate.
HTH
--
Udit
09-15-2011 01:51 PM
"IPv6 Support in Cisco Unified Communications Devices"
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/ipv6/ipv6inuc.html#wp1054170
You can enable IPv6 on your phones by going to CCAdmin, Device > Device Settings > Common Device Configuration
IP Addressing Mode Preference for Signaling: IPv4 (default)
Apply the common device configuration on the phone, save it and reset it.
12-15-2014 04:05 AM
Hi,
I try it's not working.
My all 9971 Phone register with CUCM 9.1 in IPv4.
I can not find the option in the network configuration on the phone.
Arun Prakash Sharma
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide