cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
627
Views
0
Helpful
3
Replies

Cisco ATA 190 compatiblity

dan.upton1
Beginner
Beginner

Working with a customer to setup a Cisco ATA 190. Skimmed the administration doc but wanted to get confirmation on this. Can we use the ATA 190 without a Call Manager? We are attempting to connect this to another vendor's SIP proxy.

 

Thanks

3 Replies 3

Manish Gogna
Cisco Employee
Cisco Employee

Hi Dan,

This should be checked with the third party with which the ATA is being integrated. Just like CUCM has the option of adding 3rd party SIP they might have a similar option.

HTH

Manish

Hi Manish,

 

I appreciate the response. The third party does have a SIP Proxy/Gateway to register the ATA to. Can we configure the ATA without a CCM? If so, where are those instructions. I haven't seen them. We need to assign it to an IP (not using DHCP).

Thanks,

Dan

Jaime Valencia
Hall of Fame Cisco Employee Hall of Fame Cisco Employee
Hall of Fame Cisco Employee

It *might* be possible, notice Cisco does not test endpoints with any other call control agents, just as we do not have any documentation for trying to register it to them.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/190/1_0/english/administration/guide/sip/ATA190/a190_agBcd.html#20224

You may want to try resources like voip.org

HTH

java

if this helps, please rate
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers