Cisco CallManager-Unity-Presence not Start Automatically in UCS c220M2 VM

[Christian Quiroga]

We Have Cisco Server UCS C220 M2 with Vware Esxi 5.0, and after installation of every vm i need to each of this start automatically when the physical server start.

Acccording to this doc ( http://pubs.vmware.com/vsphere-50/index.jsp#com.vmware.vsphere.vm_admin.doc_50/GUID-6CA3CCF8-71A7-4167-AA5D-86BB67CF060D.html#GUID-6CA3CCF8-71A7-4167-AA5D-86BB67CF060D )

the steps are correct in my configuration, but after restart the physical server the vm still in shutdown state.

Note: We are running CUCM 9.1 CUC 9.1 and CUP 9.1

Any can help me.

Thanks.

[ahmed_maher]

Hi Christian,

I face the same issue, did you be able to solve it?

Thanks

[Christian Quiroga]

Hi Ahmed,

Not the problem even continuos, today i will try to apply vmware upgrades and post if this works or not.

Regards

Sent from Cisco Technical Support iPhone App

[Chris Deren]

I have not had any issues with it, can you post a screen shot of you startup/shutdown configuration?

Chris

[ahmed_maher]

[Christian Quiroga]

Hi Chris,

What exact version of Vmware you have ?

I Have VMware ESXi 5.0.0 build-623860 and seeing the picture of Ahmed, he also have the same version.

Thanks

[Christian Quiroga]

Hi Community,

I solved the issue, it's necessary to install pacth "ESXi500-201207001" to Vmware ESXi.

Look this

http://communities.vmware.com/thread/403010?start=0&tstart=0

and to apply the patch look:

http://www.youtube.com/watch?v=eycokxFEid8

Here you can find the patch:

http://www.vmware.com/patchmgr/findPatch.portal

Good Luck !!

[ahmed_maher]

Thansks Christian,

i did the update also and it worked, do you know if Esxi 5.1 is supported ?

thanks

[Chris Deren]

ESXi 5.1 is now supported on most but not all apps, see the link for the complete list:

http://docwiki.cisco.com/wiki/Unified_Communications_VMware_Requirements

HTH, please rate all useful posts!

Chris