cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

312
Views
0
Helpful
12
Replies
Highlighted
Beginner

Cisco CP-8841 3C Phone System Custom xml template

Hi everyone, 

I tried to register a cisco cp-8841 to the 3CX Phone System and It was successful. But I could not apply tr_TR language and NTP setting for the Turkey.

I had a big trouble about keepAlive of the cisco. Cisco was disapperars (seem unregisted) on the 3CX Phone System when it whereas alive. After that, Cisco can make call but no incoming calls permitted by 3CX for other users due to seem unregister of Cisco.
I couldn't see any keep alive or reregister attempt messages after the unregister of the cisco when I check via wireshark.
and Leo Laohoo solved the keepalive problem with changing the my custom xml file

 

<sipStack>
<sipInviteRetx>6</sipInviteRetx>
<sipRetx>10</sipRetx>
<timerInviteExpires>180</timerInviteExpires>
<timerRegisterExpires>120</timerRegisterExpires>
<timerRegisterDelta>5</timerRegisterDelta>
<timerKeepAliveExpires>120</timerKeepAliveExpires>
<timerSubscribeExpires>120</timerSubscribeExpires>
<timerSubscribeDelta>5</timerSubscribeDelta>
<timerT1>500</timerT1>
<timerT2>4000</timerT2>
<maxRedirects>70</maxRedirects>
<remotePartyID>false</remotePartyID>
<userInfo>None</userInfo>
</sipStack>

 

 

 

My custom xml configuration about "sipStack" was ;

 

<sipStack>
<sipInviteRetx>6</sipInviteRetx>
<sipRetx>10</sipRetx>
<timerInviteExpires>180</timerInviteExpires>
<timerRegisterExpires>3600</timerRegisterExpires>
<timerRegisterDelta>5</timerRegisterDelta>
<timerKeepAliveExpires>120</timerKeepAliveExpires>
<timerSubscribeExpires>120</timerSubscribeExpires>
<timerSubscribeDelta>5</timerSubscribeDelta>
<timerT1>500</timerT1>
<timerT2>4000</timerT2>
<maxRedirects>70</maxRedirects>
<remotePartyID>false</remotePartyID>
<userInfo>None</userInfo>
</sipStack>

 

 

THANK YOU SO MUCH LEO !!

 

I am struggling to change timezone as Turkey and language as Turkish.
I am also tried to add some custom line key for speed dial and assigned just one button as successful, but I want to add more speed dial button for Cisco CP-8841.

My custom xml template added as attachment.

 

Could you help me please ?

 

 

Trust is good, control is better...
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Hall of Fame Community Legend

Re: Cisco CP-8841 3C Phone System Custom xml template

If IST is +1 GMT then the timezone should be 

<timeZone>W. Europe Standard/Daylight Time</timeZone>
<olsonTimeZone>Europe/Istanbul</olsonTimeZone>

View solution in original post

12 REPLIES 12
Highlighted
Hall of Fame Community Legend

Re: Cisco CP-8841 3C Phone System Custom xml template

If IST is +1 GMT then the timezone should be 

<timeZone>W. Europe Standard/Daylight Time</timeZone>
<olsonTimeZone>Europe/Istanbul</olsonTimeZone>

View solution in original post

Highlighted
Beginner

Re: Cisco CP-8841 3C Phone System Custom xml template

Actually Istanbul is +3 GMT

What is your advice about Localization (turkish language of the phone) and speed dial buttons ?

Trust is good, control is better...
Highlighted
Beginner

Re: Cisco CP-8841 3C Phone System Custom xml template

Hi @Leo Laohoo is there any advice for the +3GMT without DaylightTime ?
Trust is good, control is better...
Highlighted
Hall of Fame Community Legend

Re: Cisco CP-8841 3C Phone System Custom xml template


@nfide14022 wrote:
Hi @Leo Laohoo is there any advice for the +3GMT without DaylightTime ?
<timeZone>Russian Standard/Daylight Time</timeZone>

Try that.

Highlighted
Beginner

Re: Cisco CP-8841 3C Phone System Custom xml template

should I remove olsonTimeZone when I use the "Russian Standard/Daylight Time" ?
Because It is still 1 hour behind.
It s 10:24 PM rightNow.
Trust is good, control is better...
Highlighted
Hall of Fame Community Legend

Re: Cisco CP-8841 3C Phone System Custom xml template

Try "Arabian Standard Time".

Highlighted
Beginner

Re: Cisco CP-8841 3C Phone System Custom xml template

Hi Leo Laohoo, I tried Arabia Standad Time with olsonTime Asia/Kuwait and Russian Standard/DayLight Time but time is 16:30 when it alaigned to russian time or arabian time. I also tried to set my local ntp server but still the same... my xml is like at the below;

<dateTimeSetting>
<name>CMLocal</name>
<dateTemplate>D/M/YY</dateTemplate>
<timeZone>Arabia Standard Time</timeZone>
<olsonTimeZone>Asia/Kuwait</olsonTimeZone>
<ntps>
<ntp>
<name>192.168.1.1</name>
<ntpMode>unicast</ntpMode>
</ntp>
</ntps>
</dateTimeSetting>
Trust is good, control is better...
Highlighted
Hall of Fame Community Legend

Re: Cisco CP-8841 3C Phone System Custom xml template

What is the difference of the time of the phone and the actual timezone? +/-30 minutes?
Highlighted
Beginner

Re: Cisco CP-8841 3C Phone System Custom xml template

It shows 3 JUN 2020 and 16:30 when the real date time is 09.06.2020 09:30
Trust is good, control is better...
Highlighted
Hall of Fame Community Legend

Re: Cisco CP-8841 3C Phone System Custom xml template

That's +7 hours difference. What country is the phone meant to be in? Turkey, wasn't it?
Highlighted
Beginner

Re: Cisco CP-8841 3C Phone System Custom xml template

Yes, the phone located in Turkey, Turkey in GMT+3 time zone. So It s 11:06 15.06.2020 right now in Turkey.
Trust is good, control is better...
Highlighted
Hall of Fame Community Legend

Re: Cisco CP-8841 3C Phone System Custom xml template

For Turkey, it is either Russian Standard/Daylight Time or Saudi Arabia Standard Time.
CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey