Cisco CUCM with ISR 4331 FXO PSTN connection

[amalmichaelvj]

Hello Cisco team,

Am planning a Cisco CUCM and ISR 4331 gateway Configuration. Anybody done h323 gateway config .Please share example of Configuration example if possible.

CUCM>>h323>>gateway

what are the commands in ISR router.

And in case of FXO what call i need to configure for inboud and outboud calls.

Please share dial Peer.

[Roger Kallberg]

There are plenty of configuration documentation available on cisco.com. Advise you to read this or if you do not want to collect the needed knowledge yourself to reach out to a reputable system integrator with a specialisation in Unified Communication.

The community is not here to provide you with a complete configuration without any effort on your part.

[Jonathan Schulenberg · Accepted solution]

Also, H.323 is end of life.

https://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-border-element/bulletin-c25-2479306.html