Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi all,I have had a few Cisco 7900 series phones returned to me recently with the same problem When the phone receives PoE the whole phone lights up the only the speaker light stays on and all else goes off. Factory reset not functional at this point...
Hi, I have a CUCM SME cluster that receives calls from 2 different CUCM clusters, say Org Unit A and Org Unit B. The SME cluster is connected to CUBE. I have 2 SIP trunks from the ITSP on the CUBE on 2 different WAN-side interfaces (say, Gi 1 and 2) ...
Hi,Can we get Reporting of users login / logout / tea break / prayer break / meeting break status (i.e. complete login-logout monthly report of each employee) in CDR or some other way in CUCM.Regards.
Can we track the extension mobility login and logout timings of users from CAR or CDR.Regards
I am setting up a new CUCM and Unity cluster. I have configured integration using SIP. When I pickup a phone and press the voicemail button it works great. When I call internally and get forwarded to voicemail again it works great. When I call fr...
Hello Everyone,I am planning to change the host name of our 9 CUCM servers from IP to FQDN.Few Questions:1) Do I need to regenerate certificates and upload to CUCM servers after changing the IP to FQDN?2) All phones services, Enterprise Parameters an...
Hello, Need some help. We have a bunch of DID's that have a number 424-865-63XX and we want to change the number when called to a different extension when it is called. For example, when someone calls 424-865-6380 we want it to ring on internal ext 3...
I'm currently migrating to 4331 ISR's from 2800 series routers. Has anyone had issues with the NAME: "NIM subslot 0/2", DESCR: "NIM-2FXS/4FXO Voice Analog Module"PID: NIM-2FXS/4FXO , VID: V01, SN: FOC20375GE1 NAME: "PVDM subslot 0/4", DESCR: "PVDM4-...
Hi All,I've been setting up Cisco MRA using Exp-E and Exp-C and a CUCM 11.5 in the inside. I have followed all the guides, both expressways are up, the traversal zone is up and running on both sides. I can succesfully register jabber when i'm inside ...
Hello!I need to check some client for correct auth.I make small tools for it:https://github.com/OlegPowerC/SIPdigestCalculatorUsage:SIPdigestcalculator.exe -u username -r realm -p password -n nonce -uri SIP URIorSIPdigestcalculator.exe -u username -r...
Is there a fairly easy way to use a Cisco up phone as a normal landline in my house? I would like to use one in my office at home without the need for a complicated set up. Just wondered if it was possible with some know how?
Hi,I have been working on getting LDAP set up on Cisco Unity Connection server so my users dont have to manually type in a voicemail password in Jabber. I thought I had this acomplished! On Jabber Desktop, everything automatically signs in incl voic...
Hi cisco I received one request for voice mail in unity connection with a scenario :once a customer call extension from 1 pm to 2 pm the customer should be hiring the voice mail directly once a customer call extension after working hours and weeken...
I have an older ATA 191 that i am trying to get Multiplatform Firmware loaded too. The existing Web UI does not have the options under the administration area to send the command to update from a local TFTP. I also found a couple deployment guides th...
Hello Everyone,i have a wired situation with my customer about Cisco jabber call over VPN of forti.when user call to external number from Cisco phone that register to his LAN the calls work perfectly.when user call to external number from CSF Device ...
