02-24-2014 11:54 AM - edited 03-16-2019 09:53 PM
When our phone system was installed over a year ago the tech that was onsite used a command when after he would telnet into our voce gateway that would display informatin about every call that was going through the system.
For the life of me I can not recall the command that he used.
It was like a debugging tool that everytime a call was placed information about the call, source, destination, protocolots, off hook, on hook, etc...
Can anyone please help jog my brain into remembering this cisco gateway command?
thanks in advance
Solved! Go to Solution.
02-24-2014 11:58 AM
show voice call status
debug isdn q931 ----->(Don't forget to turn on "term mon")
HTH
Regards,
Yosh
02-24-2014 11:58 AM
show voice call status
debug isdn q931 ----->(Don't forget to turn on "term mon")
HTH
Regards,
Yosh
02-24-2014 12:11 PM
yes, that is the command, thank you!
02-24-2014 12:12 PM
You're welcome.
Regards,
Yosh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide