cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 
cancel
1047
Views
0
Helpful
4
Replies

Cisco IP Phone obtain both DATA Vlan IP and Voice VLAN IP randomly

Bakhytzhan.Rais
Level 1
Level 1

hello gents

I have CUOM installed to monitor our Cisco IP Telephony Environment

I noticed that some of IP phones receives DATA VLAN IP

in the attachment you can see lof from CUOM

Switches details

146.31.162.21 

WS-C3750G-24PS

C3750-IPBASE-M, Version 12.2(35)SE5

146.31.162.163

WS-C3750E-24PD

C3750E-UNIVERSALK9-M, Version 12.2(50)SE2

any ideas?

Thanks

Rais

4 Replies 4

Bakhytzhan.Rais
Level 1
Level 1

hello

any suggestions?

What type of phones you have? 7911?

Please rate replies and mark question as "answered" if applicable.

Cisco Unified IP Phone 7945G, Global, Gig Ethernet, Color

App Load ID
jar45sccp.9-1-1TH1-16.sbn
Boot Load ID
tnp45.8-3-1-21a.bin
Version
SCCP45.9-1-1SR1S

last debug info from phone


20:18:08 25: Name=SEPC0626BD2F39D Load= SCCP45.9-1-1SR1S  Last=Initialized

15:30:14 9: Name=SEPC0626BD2F39D Load= SCCP45.9-1-1SR1S TFTP  Error

15:30:14 23: Name=SEPC0626BD2F39D Load= SCCP45.9-1-1SR1S  Last=Reset-Restart

15:30:38 9: Name=SEPC0626BD2F39D Load= SCCP45.9-1-1SR1S TFTP  Error

15:30:38 23: Name=SEPC0626BD2F39D Load= SCCP45.9-1-1SR1S  Last=Reset-Restart

15:32:19 23: Name=SEPC0626BD2F39D Load= SCCP45.9-1-1SR1S  Last=Reset-Restart

15:58:40 41: Name=SEPC0626BD2F39D Load= SCCP45.9-1-1SR1S Last=IPv4 DHCP  Timeout

15:58:40 7: Name=SEPC0626BD2F39D Load= SCCP45.9-1-1SR1S TFTP  Timeout

15:58:40 41: Name=SEPC0626BD2F39D Load= SCCP45.9-1-1SR1S Last=IPv4 DHCP  Timeout

15:58:40 7: Name=SEPC0626BD2F39D Load= SCCP45.9-1-1SR1S TFTP  Timeout

15:58:40 41: Name=SEPC0626BD2F39D Load= SCCP45.9-1-1SR1S Last=IPv4 DHCP  Timeout

15:58:41 14: Name=SEPC0626BD2F39D Load= SCCP45.9-1-1SR1S  Last=UCM-closed-TCP

16:00:45 10: Name=SEPC0626BD2F39D Load= SCCP45.9-1-1SR1S  Last=TCP-timeout

20:25:08 41: Name=SEPC0626BD2F39D Load= SCCP45.9-1-1SR1S Last=IPv4 DHCP  Timeout

Hi,

The VLAN is assign by the switch so it's where the problem could be.. Folow this guide:

http://www.cisco.com/en/US/products/hw/switches/ps628/products_configuration_example09186a0080b95982.shtml

Please rate all useful posts 
_____________________________
LinkedIn Profile: do.linkedin.com/in/leosalcie
MDGDP, CCNA, CCNA Voice certified

__________________________________________________
Please remember to rate useful posts clicking on the stars below.
LinkedIn Profile: do.linkedin.com/in/leosalcie