05-16-2012 08:20 AM - edited 03-16-2019 11:11 AM
Hey Guys,
Need help here. I have got the same extension on botht he cisco jabber and sccp extension. But I cant get both these to ring at the same time.
Any suggestions....
Oh yeah I am using CME
Solved! Go to Solution.
05-16-2012 09:00 AM
Cisco Unified CME 8.6 and later versions support Cisco Jabber. The softphone SIP client is an iPhone application and works as a SIP softphone. The SIP softphone client is capable of supporting VoIP over WLAN. Cisco Unified CME 8.6 supports supplementary services such as Hold, Resume, Transfer, Call Park, and Call Pickup for the softphone SIP client.
Note
Shared line, conference, and hand-off call to GSM are not supported.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
05-16-2012 09:23 AM
That is supported in CME 9.0
That means you will need and ISR G2 to use the features. It will never work on an ISR G1 router.
05-16-2012 09:00 AM
Cisco Unified CME 8.6 and later versions support Cisco Jabber. The softphone SIP client is an iPhone application and works as a SIP softphone. The SIP softphone client is capable of supporting VoIP over WLAN. Cisco Unified CME 8.6 supports supplementary services such as Hold, Resume, Transfer, Call Park, and Call Pickup for the softphone SIP client.
Note
Shared line, conference, and hand-off call to GSM are not supported.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk
05-16-2012 09:23 AM
That is supported in CME 9.0
That means you will need and ISR G2 to use the features. It will never work on an ISR G1 router.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide