cisco unified CME 7.1 (need help)

[shendisundari]

hi,

i will make voip with cme at cisco router 2811 with cme 7.1 and used sip phone spa 303..spa 303 is supported by cme 7.1?if anyone has a reference about configure voip used ip phone spa 303 with cme 7.1 please share to me,thanks

[Chris Deren]

No, these phones are not supported with CME, they are only supported with these systems:

Supports both Session Initiation Protocol (SIP) for

Cisco SPA9000 Voice System

, open source, and hosted telephony solutions and Smart Phone Control Protocol (SPCP) for

Cisco Unified Communications 500 Series for Small Business

http://www.cisco.com/cisco/web/solutions/small_business/products/voice_conferencing/SPA_500/index.html

HTH,

Chris

[shendisundari]

oh,thank you chris deren....

whether softphone like x-lite or eyebeam supported by cme 7.1?iam a newbie in voip,do you have reference configure voip with protokol sip used cisco unified cme?with end point x-lite or either ip phone because often I find a configuration voip in packet tracer but are in fact different commad from the current configuration of the hardware

[bernhardczapp]

Though you are able to run SPA3XX Phones with UC500-Series it should also be possible to use them with Communications Manager Express.

Have a look at the this guide for more information:

https://supportforums.cisco.com/docs/DOC-9465

(this ist not perfect but...)

Looks like these phone are integrated as SIP-Devices/Phones. This should work with any ccme