Cisco Unified Wireless IP Phone 7925G

[shmoha0070]

How to add

Cisco Unified Wireless IP Phone 7925G

  phones..i mean how will be the connection .

I want to add 7925G wirless phones in 2901 cme 

[paolo bevilacqua]

Same as any other phone type.

[shmoha0070]

Is there any other Extra hardware required Required to add a wireless phones

[paolo bevilacqua]

One or more APs.

[shmoha0070]

Ok so u mean if i want to add a wirless phones i need 2-3 wirless access

points for adding that i want to add 13 wirless phones

[paolo bevilacqua]

Depends on coverage you need to give, you will get a different number and types of APs.

Please remember to rate useful posts clicking on the stars below.

[Ven Taylor]

Are you asking how to get a wireles phone to register wirelessly or how to get CME to show the 7925G as a device?

I haven't worked with CME, but with CUCM, some phone types are not part of the default configuration and need to have their files uploaded before being recognized as a device type.

One of the engineers here has recently done this with the latest version of CME on a router.  He downloaded the latest tar file from the Cisco website and installed it on the router and the 7925G was recognized.

Ven

[paolo bevilacqua]

For your information Ven.

The tar file only contains auxiliary files. It is actually not needed to register and get working a 7925, or any other phone type. That is different from CUCM.

[shmoha0070]

is some body told me before no need ap for that ..

is it work with ap?or need any other specific harware to add a wireless

less phone

[paolo bevilacqua]

Excuse me but I've answered you before already:

A wireless phone needs a wireless AP to work.

It is as simple as that.

[Udit Mehrotra]

As Paolo said, for any wireless device, you nee Wireless AP.

Check Table 2 for different AP supported -

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps379/ps9900/data_sheet_c78-504890.pdf

[shmoha0070]

*

is it need a specific Ap model or whether can use this model "WAP4410N-G5

[paolo bevilacqua]

Are you the end user? I weould recommend you contact a reputable consultant or Cisco partner for you needs, otherwise it will be very difficult for you to get anything done.

[shmoha0070]

Could u please tell me it need any specifc Ap model or?

could u please tell me wether

7925 G works with

WAP4410N-G5

[fahdkuwait]

Guys please help

7925g wil work with

WAP4410N or not