12-04-2016 07:26 PM - edited 03-17-2019 08:51 AM
Hello Guys
i am having trouble with cisco phone 8821, firmware version active load :sip8821.11-0-2SR2-1, bootload sb28821.HE-01-019, keep rebooting while on the desk or roaming. and it is showing network busy when dialing out.
the cucm ver: System version: 11.0.1.20000-2
anyone can help
12-04-2016 08:24 PM
Hi,
Is it happening with all 8821 phones or with one in particular?
As a proactive step if its happening on all you can upgrade one to cmterm-8821-sip.11-0-3-6.k3.cop.sgn and see if there is any improvement.
Also you can attach console logs from one of the 8221 here to for us to review.
Please do mention the timestamp when it reboots.
Please rate and mark correct if helpful
Regards,
Adarsh Chauhan
12-05-2016 06:54 PM
12-05-2016 09:33 PM
Hi,
I had a look at the console logs and it seems to be in a loop where it's connecting to
selected BSS 70:e4:22:aa:c9:74 ssid='TALK2'
again and again.
I did a bug scrub and got couple of hits but not convincing and some were resolved in the latest version.
8821 is a fairly new phone and I would suggest you to open a TAC case.
Please rate and mark correct if helpful
Regards,
Adarsh Chauhan
01-17-2017 09:56 PM
The Network Busy issue is a known defect on the 8821 handset. TAC told me to disable ACM on the WLC (Wireless tab > 802.11a/n/ac or b/g > Media and then the Call Admission Control checkbox as a workaround. I didn't do it as I prefer having it on and the issue wasn't regular enough to worry about for now.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide