05-19-2012 05:18 AM - edited 03-16-2019 11:14 AM
Hi all,
We have 8961 and 9951 ip phones configured with CME 9.0, now we have to add CKEM modules to this phones. The problem is the CME 9.0 doesn't support this modules.
Some discussion says that CKEM will be supported with CME 9.1 included in IOS 15.2(3)T !! is this true ? and how can I configure this module on CME?
Thank you very much,
Best regards
Solved! Go to Solution.
05-19-2012 05:51 PM
Cisco Unified CME and Cisco IOS Software Version Compatibility Matrix
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm
Cross-Platform Release Notes for Cisco IOS Release 15.2M&T
http://www.cisco.com/en/US/docs/ios/15_2m_and_t/release/notes/152-2TNEWF.html
The first link show the current Compatibility Matrix. The second link shows the new features released in the last 3 versions of 15.2 and does not indicate any new changes to CME in the latest 15.2(3)T release. If not specifically called out, the features for CME 9.0 are used from previous release 15.2(2)T.
Hope this helps.
05-19-2012 07:33 AM
From Cisco documentation IOS 15.2(3)T still have CME 9.0, so as of today, there is no solution.
So for CKEM support one has to wait for a later release at an unknown date.
05-19-2012 12:32 PM
Thank you Paolo for your response, but I can't find this in Cisco documentation (which specify that IOS 15.2(3)T still have CME 9.0), can you send me the link of this documentation ?
Best regards
05-19-2012 05:51 PM
Cisco Unified CME and Cisco IOS Software Version Compatibility Matrix
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm
Cross-Platform Release Notes for Cisco IOS Release 15.2M&T
http://www.cisco.com/en/US/docs/ios/15_2m_and_t/release/notes/152-2TNEWF.html
The first link show the current Compatibility Matrix. The second link shows the new features released in the last 3 versions of 15.2 and does not indicate any new changes to CME in the latest 15.2(3)T release. If not specifically called out, the features for CME 9.0 are used from previous release 15.2(2)T.
Hope this helps.
05-25-2012 03:51 AM
Thank you for your help,
Best regards
02-28-2013 04:27 PM
Now compatibility matrix says it's supports KEM
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme91spc.html
But configuration still stay at dark place...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide