CME 7.1 Speeddials

[ripcisco]

Hi,

My customer has requested to have the first two buttons of a 7971 as line buttons then have some speeddials, then have more line buttons. I can't seem to get the speeddials configured in amongst the line buttons - they appear after the line buttons. Is there are workaround ?

CME  V7.1

load 7971 SCCP70.8-4-2S

load 7914 B015-1-0-3

Thanks in advance,

Paul.

[Rob Huffman]

Hi Paul,

This capability was not added until the release of CME 8.5 (on 7.1 it's working as designed)

Cisco Unified CME 8.5

8.5

Customized Button Layout

Allows you to customize the display order of various button types on a phone using the button layout feature. The button layout feature allows you to customize the display of the following button types: •Line buttons •Speed Dial buttons •BLF Speed Dial buttons •Feature Buttons •ServiceURL buttons

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeroad.html

Configuring Button Layout on SCCP Phones

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmelabel.html#wpxref48727

Cheers!

Rob

[ripcisco]

Thanks Rob – spot on as always.

Best wishes,

Paul Cobley

T: 0203 006 0271

W: www.besttel.co.uk