01-12-2020 12:29 AM
Hello,
I have CUCME 8.6 isntalled on cisco 2851 router and its working fine with us. I would like to use ATA 186 devices and the loads supported on the CME compatibility matrix 8.6 is ATA030203SCCP051201A.zup
but in the downloads I am getting ATA030204SCCP090202A.zup will it work ?
Solved! Go to Solution.
01-12-2020 07:53 PM
Hi,
As per below release notes, this firmware version is supported on CUCME Release 4.1 and later.
https://www.cisco.com/web/software/282074215/25561/cmterm-ata-sccp.3-2-4-Readme.html
01-12-2020 07:53 PM
Hi,
As per below release notes, this firmware version is supported on CUCME Release 4.1 and later.
https://www.cisco.com/web/software/282074215/25561/cmterm-ata-sccp.3-2-4-Readme.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide