CME 8.6 GUI missing

[raid.sameea]

Hi Every Body

I have CME 8.6 and I tried to enable GUI - Web to use it in configuring the CME but unfortunately it seems that the GUI folder is missing or not existing when i run "sh flash" command. Can you please help me in downloading and installing the gui folder to my CME 8.6.

Thank you

[Vaijanath Sonvane]

Hi,

Please follow below post for step by step procedure:

https://community.cisco.com/t5/collaboration-voice-and-video/enabling-gui-on-cme-step-by-step-procedure-configuration/ta-p/3153662 

[raid.sameea · Accepted solution]

Dear Vaijanath

The link is helpful, but the problem is the GUI directory is missing!!!

Thanks

[George Sotiropoulos · Accepted solution]

I would suggest the same post with the one Vaijanath did but also, upgrade your CME to a newer version.

George