04-24-2014 04:06 AM - edited 03-16-2019 10:33 PM
Hi all,
I have a C5921-K9 with CME 9.1 and two 7975G phones in a LAN. I am trying to configure the Spanish locale and I am not able to do it. I followed the steps in http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmelocal.html under "Using the Locale Installer in Cisco Unified CME 9.0 and Later Versions". The first thing I couldn't do was the cnf-file location flash: command, I always receive an "Invalid file system option" message, so I cannot store the files in flash. I have no NTP server, nor Internet access.
Could someone give me a hand? Has someone found this problem before?
Thanks in advance,
Adrián
04-24-2014 07:57 AM
Anyone who can help me?
04-29-2014 05:00 AM
Please, any help?
Thanks!!
04-29-2014 07:10 AM
Are you actually using a 5921 or are you using a 2921? If 5921, it may have different storage options such as disk0:. You'll need to look at the file system available to you on that platform.
04-29-2014 08:40 AM
Hi Brian,
Thanks for your reply . It's actually a Mildef equipment with an embedded c5921-K9.
The options that it gives are flash0: and tftp, but it doesn't accept the command when trying to select the flash0: file system.
Any other clue?
Thanks again,
Adrián
04-29-2014 09:27 AM
What does "show file systems" show for available devices?
05-05-2014 01:54 AM
Hi,
here are several outputs and responses:
R#show file systems
File Systems:
Size(b) Free(b) Type Flags Prefixes
- - opaque rw archive:
- - opaque rw system:
262144 254314 nvram rw nvram:
- - opaque rw tmpsys:
49545560064 48390352896 disk rw flash0:
* 49545560064 48390352896 disk rw unix:
- - network rw snmp:
- - opaque rw null:
- - network rw tftp:
- - opaque ro xmodem:
- - opaque ro ymodem:
- - opaque wo syslog:
- - network rw rcp:
- - network rw pram:
- - network rw ftp:
- - network rw http:
- - network rw scp:
- - opaque ro tar:
- - network rw https:
- - opaque ro cns:
---------------------------------------------------------------
R(config-telephony)#cnf-file location ?
TFTP Store CNF files to external TFTP server
flash: Store CNF files to flash:
---------------------------------------------------------------
R(config-telephony)#cnf-file location flash0:
^
% Invalid input detected at '^' marker.
Thanks,
05-05-2014 07:03 AM
It looks to me like it's possibly a bug or TFTP might be your only option. Can you run a TFTP server on that Mildef box?
05-05-2014 08:05 AM
Hi Brian,
Are you saying as an external TFTP server? I don't know for sure, I will have to try because it is a CentOS.
I forgot to mention before, but the CLI doesn't accept this command:
Router(config-register-global)#user-locale 2 DE load CME-locale-de_DE-German-8.6.3.0.tar
It only accepts:
Router(config-register-global)#user-locale 2 DE
Do you think this could be a bug? If so, what could I do to fix it?
Thanks,
Adrián
05-08-2014 12:52 AM
Hi,
I can't deploy a TFTP server on this device. Any other suggestion or do you know how to fix this bug?
Thanks for your cooperation,
Adrián
05-05-2014 07:17 AM
"flash:" and "flash0:" are the same its point to the same flash , if you had flash1: then it will be a different flash.
Use flash: on telephony service it will work.
R(config-telephony)#cnf-file location flash:
Thanks
Manish
05-05-2014 08:08 AM
Hi Manish,
It doesn't work either, I receive an "Invalid file system option" message.
Thanks!
Adrián
05-05-2014 01:52 AM
Hi,
here are several outputs and responses:
R#show file systems
File Systems:
Size(b) Free(b) Type Flags Prefixes
- - opaque rw archive:
- - opaque rw system:
262144 254314 nvram rw nvram:
- - opaque rw tmpsys:
49545560064 48390352896 disk rw flash0:
* 49545560064 48390352896 disk rw unix:
- - network rw snmp:
- - opaque rw null:
- - network rw tftp:
- - opaque ro xmodem:
- - opaque ro ymodem:
- - opaque wo syslog:
- - network rw rcp:
- - network rw pram:
- - network rw ftp:
- - network rw http:
- - network rw scp:
- - opaque ro tar:
- - network rw https:
- - opaque ro cns:
---------------------------------------------------------------
R(config-telephony)#cnf-file location ?
TFTP Store CNF files to external TFTP server
flash: Store CNF files to flash:
---------------------------------------------------------------
R(config-telephony)#cnf-file location flash0:
^
% Invalid input detected at '^' marker.
Thanks,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide