cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
219
Views
0
Helpful
5
Replies
Highlighted
Beginner

cme connection problem

Good Morning I've a little problem with a cme and fxo card.

well.

I've a callmanager express, that work.

I've also another router  wher are connected all analogic lines and faxes. connected via sip trunk to callmanager express.

On this second router I've installed a fxo card directy connected to a fxs port of an UMTS router.

Our customer want tha all call directed to a mobile devices will be router from callmanager to the fxo port of second router.

I've implemented the following configuration. but the calls doesn't works.

can you help me?

thanks in advance

      

Immagine.gif

CCME

dial-peer voice 1340 voip

destination-pattern 89T

session target ipv4:172.16.3.91

dtmf-relay h245-alphanumeric

no vad

second router (with fxo card)

dial-peer voice 1340 voip

destination-pattern 89T

session target ipv4:172.16.3.90

dtmf-relay h245-alphanumeric

no vad

!

dial-peer voice 1340 pots

destination-pattern 89T

port 0/1/0

!

T voice-port 0/1/0

no comfort-noise
cptone IT

2 ACCEPTED SOLUTIONS

Accepted Solutions
Highlighted

Please post the output of debug voip ccapi inout,

Give us the called number and calling number and exctly as you is dialing

Cheers
Bruno Rangel

"Se você quiser alguém em quem confiar, confie em si mesmo. Quem acredita sempre alcança"
Renato Russo

Cheers
Bruno Rangel

Please remember to rate helpful responses using the star bellow and identify helpful or correct answers

View solution in original post

Highlighted

Is 89 supposed to be stripped as pots dial-peers strip all explicitly matched digits, in your case 89 will both be stripped before sending the call to PSTN.

Can you also post "debug voice dialpeer" from both routers?

Chris

View solution in original post

5 REPLIES 5
Highlighted
Advocate

Hi try in the second Router shutdown the dial-peer voice 1340 voip.

Let me know if woks...

Cheers
Bruno Rangel

"Se você quiser alguém em quem confiar, confie em si mesmo. Quem acredita sempre alcança"
Renato Russo

Cheers
Bruno Rangel

Please remember to rate helpful responses using the star bellow and identify helpful or correct answers
Highlighted

Hi Bruno , now the dial-peer 1340 on second router is shutdowan but doesn't work!

Highlighted

Please post the output of debug voip ccapi inout,

Give us the called number and calling number and exctly as you is dialing

Cheers
Bruno Rangel

"Se você quiser alguém em quem confiar, confie em si mesmo. Quem acredita sempre alcança"
Renato Russo

Cheers
Bruno Rangel

Please remember to rate helpful responses using the star bellow and identify helpful or correct answers

View solution in original post

Highlighted

Is 89 supposed to be stripped as pots dial-peers strip all explicitly matched digits, in your case 89 will both be stripped before sending the call to PSTN.

Can you also post "debug voice dialpeer" from both routers?

Chris

View solution in original post

Highlighted

Hi. I've solved!!!

The problem was an old  dial-peer  configured but not used on second  router.

I've put in shutdown this dial peer and now alla works!!!

Thanks for help

giancarlo