Hi community,
I'm trying to set up sip trunking from my ISP, but still have not able to received or get the call out of the router, this the context the ISP provide the sip server using the same fiber router where I get the internet, it is using the LAN port 1, the sip trunks do not required authentication due to this connection. here is the parameters they gave us.
The only thing I'm looking for it's for the sip trunking numbers to ring on extensión 103
| Parameters |
| no authentication |
| IP: 10.65.65.19 |
| MASK: 255.255.224.0 |
| GTW: 10.65.64.1 |
| Proxy: 10.187.128.3 |
| routing: 10 digits |
| routing coming in: last 4 digits |
| Codec audio: G711ALAW Y G729 |
| Port UDP 5060 |
| Pilot: 614-388-8800 |
this is my current router configuration :
1. cisco 3945 configuration.
1.- The next to files have the command "debug ccsip messages" for incoming calls, I post it on word file because the app did not let me upload it in txt format.
2.- The command "debug voip dialpeer all" for outgoing calls.
I have been reading a lot of configurations, but still have not been able of received ir call out.
Thank you very much for your help in advance.
kotusha
