cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2044
Views
13
Helpful
22
Replies

CME SIP Trunking Cisco 3945 for SIP Provider

kotushaMx
Level 1
Level 1

Hi community,

I'm trying to set up sip trunking from my ISP, but still have not able to received or get the call out of the router, this the context the ISP provide the sip server using the same fiber router where I get the internet, it is using the LAN port 1, the sip trunks do not required authentication due to this connection. here is the parameters they gave us.

The only thing I'm looking for it's for the sip trunking numbers to ring on extensión 103

 

Parameters
no authentication
IP: 10.65.65.19
MASK: 255.255.224.0
GTW: 10.65.64.1
Proxy: 10.187.128.3
routing: 10 digits
routing coming in: last 4 digits
Codec audio: G711ALAW Y G729
Port UDP 5060
Pilot: 614-388-8800

this is my current router configuration :

1. cisco 3945 configuration.

1.- The next to files have the command "debug ccsip messages" for incoming calls, I post it on word file because the app did not let me upload it in txt format.

2.- The command "debug voip dialpeer all" for outgoing calls.

I have been reading a lot of configurations, but still have not been able of received ir call out.

Thank you very much for your help in advance.

kotusha

 

 

22 Replies 22

kotushaMx
Level 1
Level 1

I see that now, we delete the sip-server ipv4:10.187.128.3:  

Spoiler
session target sip-server

or add  on the dial peer

Spoiler
session target ipv4:10.187.128.3

I will try it, and let you know.

Thank you

 

 

 

 

kotushaMx
Level 1
Level 1

The time clock on ip phones is 6 hours ahead from the time clock of the router. do u have any idea why this is happening? 

 Thank you

Yes I have, it shows the wrong time since you haven't configured the time zone in you CME configuration. I don't know what TZ you're in, so you'll need to select the appropriate time-zone number to set under telephony-service.

 

telephony-service
 time-zone <number>
 time-format 24
 
time-zone ?
  <1-56>  select timezone name used by IP phones (offset in minutes)
1 Dateline Standard Time -720
2 Samoa Standard Time -660
3 Hawaiian Standard Time -600
4 Alaskan Standard/Daylight Time -540
5 Pacific Standard/Daylight Time -480
6 Mountain Standard/Daylight Time -420
7 US Mountain Standard Time -420
8 Central Standard/Daylight Time -360
9 Mexico Standard/Daylight Time -360
10 Canada Central Standard Time -360
11 SA Pacific Standard Time -300
12 Eastern Standard/Daylight Time -300
13 US Eastern Standard Time -300
14 Atlantic Standard/Daylight Time -240
15 SA Western Standard Time -240
16 Newfoundland Standard/Daylight Time -210
17 E. South America Standard/Daylight Time -180
18 SA Eastern Standard Time -180
19 Mid-Atlantic Standard/Daylight Time -120
20 Azores Standard/Daylight Time -60
21 GMT Standard/Daylight Time +0
22 Greenwich Standard Time +0
23 W. Europe Standard/Daylight Time +60
24 GTB Standard/Daylight Time +60
25 Egypt Standard/Daylight Time +120
26 E. Europe Standard/Daylight Time +120
27 Romance Standard/Daylight Time +120
28 Central Europe Standard/Daylight Time +120
29 South Africa Standard Time +120
30 Jerusalem Standard/Daylight Time +120
31 Saudi Arabia Standard Time +180
32 Russian Standard/Daylight Time +180
33 Iran Standard/Daylight Time +210
34 Caucasus Standard/Daylight Time +240
35 Arabian Standard Time +240
36 Afghanistan Standard Time +270
37 West Asia Standard Time +300
38 Ekaterinburg Standard Time +300
39 India Standard Time +330
40 Central Asia Standard Time +360
41 SE Asia Standard Time +420
42 China Standard/Daylight Time +480
43 Taipei Standard Time +480
44 Tokyo Standard Time +540
45 Cen. Australia Standard/Daylight Time +570
46 AUS Central Standard Time +570
47 E. Australia Standard Time +600
48 AUS Eastern Standard/Daylight Time +600
49 West Pacific Standard Time +600
50 Tasmania Standard/Daylight Time +600
51 Central Pacific Standard Time +660
52 Fiji Standard Time +720
53 New Zealand Standard/Daylight Time +720
54 Venezuela Standard Time -270
55 Pacific SA Daylight Time -180
56 Pacific SA Standard Time -240

 

 



Response Signature


kotushaMx
Level 1
Level 1

Thank you very much, without you help it will have take forever to get it up and running, I going to paste the working  configuration so we can help other. Thank you very much again, I will start working on a NME-CUE module to get voicemail and Auto attendant, if you have any information in how to get it working I will appreciated. Thank you so much one more time.

!
ip dhcp excluded-address 172.16.1.1 172.16.1.10
!
ip dhcp pool VOICE
 network 172.16.1.0 255.255.255.0
 default-router 172.16.1.1
 option 150 ip 172.16.1.1
 dns-server 8.8.8.8
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
!

voice call carrier capacity active
!
voice service voip
 ip address trusted list
  ipv4 10.187.128.3 255.255.255.255
 mode border-element license capacity 30
 allow-connections sip to sip
 no supplementary-service sip moved-temporarily
 no supplementary-service sip refer
 supplementary-service media-renegotiate
 fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
 sip
  bind control source-interface GigabitEthernet0/2
  bind media source-interface GigabitEthernet0/2
  header-passing
  privacy-policy passthru
!
!
voice class uri PSTN sip
 host ipv4:10.187.128.3
voice class codec 1
 codec preference 1 g711alaw
 codec preference 2 g729r8
!

!
voice translation-rule 1
 rule 1 /^9\(.*\)/ /\1/
!
voice translation-rule 2
 rule 1 /.../ /6143888800/  **** Three digits any extention calls out thru the pilot number from ISP Telecomm
!
voice translation-rule 11
 rule 1 /....$/ /103/    **** Last Four digits of incomming calls get transfer to Extention 103  
!
!
voice translation-profile PSTN_INCOMING
 translate called 11
!
voice translation-profile SIP
 translate calling 2
 translate called 1
!
!
interface GigabitEthernet0/0
 ip address 192.168.1.19 255.255.252.0
 duplex auto
 speed auto
!
interface GigabitEthernet0/1
 ip address 172.16.1.1 255.255.255.0
 ip nat inside
 ip virtual-reassembly in
 duplex auto
 speed auto
 media-type rj45
!
interface GigabitEthernet0/2
 ip address 10.65.65.19 255.255.224.0
 duplex auto
 speed auto
!
!
ip default-gateway 192.168.1.254
!
ip route 0.0.0.0 0.0.0.0 192.168.1.254
ip route 10.187.128.0 255.255.255.0 10.65.64.1
!
!
dial-peer voice 9000 voip
 description ** INBOUND CALLS from telecoms **
 translation-profile incoming PSTN_INCOMING
 session protocol sipv2
 incoming uri via PSTN
 voice-class codec 1
 voice-class sip early-offer forced
 dtmf-relay rtp-nte
 no vad
!
dial-peer voice 100 voip
 description **** OUTBOUND CALLS to telecoms *****
 translation-profile outgoing SIP
 destination-pattern 9T
 session protocol sipv2
 session target sip-server
 voice-class codec 1
 voice-class sip early-offer forced
 dtmf-relay rtp-nte
 no vad
!
sip-ua
 no remote-party-id
 retry invite 2
 retry options 1
 timers connect 100
 sip-server ipv4:10.187.128.3
!
!
!
telephony-service
 max-ephones 60
 max-dn 60
 ip source-address 172.16.1.1 port 2000
 auto assign 1 to 10 type 7965
 cnf-file location flash:
 cnf-file perphone
 user-locale ES load CME-locale-es_ES-Spanish-12.0.12.0.tar
 network-locale ES
 load 7937 apps37sccp.1-4-4-0
 load 7965 SCCP45.9-2-1S
 max-conferences 8 gain -6
 web admin system name cisco password cisco
 transfer-system full-consult
 create cnf-files version-stamp Jan 01 2002 00:00:00
!
!
ephone-dn  1  dual-line
 number 101
!
!
ephone-dn  2  dual-line
 number 102
!
!
ephone-dn  3  dual-line
 number 103
!
!
ephone  1
 device-security-mode none
 mac-address 0004.F2F7.20B8
 type 7937
 button  1:1
!
!
!
ephone  2
 device-security-mode none
 mac-address 0064.40B4.9D68
 type 7965
 button  1:2
!
!
!
ephone  3
 device-security-mode none
 mac-address 0026.0B5C.543E
 type 7965
 button  1:3 
!
!
!

 

Glad to hear that you got it to work. One thing, why did you mark your own answer as the solution to your question instead of answer(s) from others who helped you solve your problems?



Response Signature


I did it know what accept has the solutions, I did accepted the last comment you gave me, and I add the information that worked for me, so in the future people can used it. thank you very  much ones again. how can I rate you?

FYI You can change what answer you selected as the solution.

IMG_5150.jpeg



Response Signature


thank you very much.