Hi!
I would like to know if it's possible to make transfer after calling outside without waiting an anser from the other side
receptioneist--> call a 9T number {transfer without waiting to anser}-->local number
*******************************************************
telephony-service
sdspfarm conference mute-on 111 mute-off 222
sdspfarm units 5
sdspfarm tag 1 confprof1
conference hardware
video
fxo hook-flash
max-ephones 200
max-dn 600
ip source-address 10.1.1.1 port 2000
calling-number local
calling-number initiator
service phone videoCapability 1
service phone ehookenable 1
service dnis overlay
service dnis dir-lookup
service dss
timeouts interdigit 5
cnf-file location flash:
load 7911 SCCP11.9-2-1S
load 7931 SCCP31.9-2-1S
load 7945 SCCP45.9-2-1S
load 7975 SCCP75.9-2-1S
time-zone 28
time-format 24
keepalive 30 auxiliary 4
bulk-speed-dial list 2 flash:code.txt
bulk-speed-dial prefix *
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh "flash:/media/music-on-hold.au"
multicast moh 239.10.16.16 port 2000
web admin system name ****** password *******
dn-webedit
time-webedit
transfer-system full-blind
transfer-pattern .T
transfer-pattern 0T
transfer-pattern T
transfer-pattern 8...
******************************************************
Sh Ver
******************************************************
Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.2(2)T, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 16-Nov-11 00:34 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M8, RELEASE SOFTWARE (fc1)
CLINIQUE uptime is 1 week, 3 days, 21 hours, 55 minutes
System returned to ROM by power-on
System restarted at 12:44:48 UTC Fri Nov 2 2012
System image file is "flash:c3900-universalk9-mz.SPA.152-2.T.bin"
Last reload type: Normal Reload
Last reload reason: power-on
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Cisco CISCO3925-CHASSIS (revision 1.0) with C3900-SPE100/K9 with 995328K/53248K bytes of memory.
Processor board ID FCZ152620CW
3 Gigabit Ethernet interfaces
31 Serial interfaces
1 terminal line
1 Channelized E1/PRI port
DRAM configuration is 72 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
License Info:
License UDI:
-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 C3900-SPE100/K9 *****************
Technology Package License Information for Module:'c3900'
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security None None None
uc uck9 Permanent uck9
data None None None
Configuration register is 0x2102
***********************************************************************************
Best regards,
