cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

AMA-CUCM Troubleshooting: Best Practices for Reading Trace Files

611
Views
0
Helpful
5
Replies
Highlighted
Beginner

conference hardware on telephony-service can not complete conference

Dear guys

Set the meet-me and ad-hoc conference function on our CME router , the i have created a meet-me conference and concall another phone by g.711 from admin phone ,the phone screen display "can not complete conference" what reason with this problem ? 

5 REPLIES 5
Engager

conference hardware on telephony-service can not complete confer

Hi Yun Zhang,

Please check if you have enabled the dual-line for these phones which are trying for conference.

Also please go through the below thread on the ssame discussion.

https://supportforums.cisco.com/message/3617812#3617812

If it helps, please rate the postings accordingly.

Thanks,

Anand

Beginner

conference hardware on telephony-service can not complete confer

Dear anchoudh

thanks  for your information, yes i have checked the all phones enabled dual-line , otherwise i have deleted the conference hardware under the telephony-service. it can conference call but restrict in three parties.

Engager

conference hardware on telephony-service can not complete confer

Hi Yun,

For Ad-Hoc conferencing, please make sure you have the phone configured  as Octo-Line and not Dual-Line, this way you can have up to 8 active  participants, otherwise if you want more then use Meet-Me.

So please change it according on these phones and try.

Thanks,

Anand

Please rate helpful posts by clicking on the stras below the right answers !!

Beginner

conference hardware on telephony-service can not complete confer

Dear

I have modified the phone-dn type from  Dual-Line to Octo-Line  , but still not complete conference when i created a meet-me conference . anyway for this ???

Hall of Fame Master

conference hardware on telephony-service can not complete confer

You can have a mistake anywhere in config, review it again.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards