cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Community Helping Community

1654
Views
0
Helpful
5
Replies
Highlighted
Beginner

Conference Now Issues - CUCM v11.0.1.21900-11

Hi All,

We are experiencing some issues with Conference Now feature in CUCM v11.0.1.21900-11. According Cisco Documentation, when a End User A has configured as a host of a Conference Now and has associated his Device and assigned as a Primary Extension and then another User B calls to Conference Now (as a first participant of the conference) associated to End User A, Device's User A will host the Conference with its MRGL.

Our issue is that when User B calls to Conference Now (as a first participant of the conference) associated to End User A, Device's User B hosts the Conference with its MRGL.

Problem here is that MRGL for Device's User B only permit one conference with 8 participants and MRGL for Device's User A has more resources for conferences.

CUCM v11.0.1.21900-11

Thanks for your help and Regards.

JM

2 ACCEPTED SOLUTIONS

Accepted Solutions
Hall of Fame Master

It appears to work as

It appears to work as designed, as the first participant establishes the conference and thus CFB via it's MRGL-->MRG gets used.  You can add secondary MRG to phone_B MRGL with redundant CFBs .

View solution in original post

Hall of Fame Master

Whoever enters the PIN number

Whoever enters the PIN number that caller is the host. Your other participants can join before or after the conference starts (PIN is entered) and will not be in a bridge until the host joins.  Sounds to me like your participants were entering the PIN rather than waiting for the host to do so. 

View solution in original post

5 REPLIES 5
Hall of Fame Master

It appears to work as

It appears to work as designed, as the first participant establishes the conference and thus CFB via it's MRGL-->MRG gets used.  You can add secondary MRG to phone_B MRGL with redundant CFBs .

View solution in original post

Beginner

Thanks for your answer Chris,

Thanks for your answer Chris,

Just to understand the following:

The host (End User) provides the Meeting Number, Time slot, and Attendees Access Code to all the participants. The host requires a PIN to join the conference, but the participants do not require it. If a participant dials into the meeting before the host, the participant hears Music on Hold (MOH). 

After the host enters both Meeting Number and PIN correctly, a conference bridge is allocated based on the MRGL (Media Resource Group List) of the host. Participants who join before the start of the meeting are redirected to the same conference bridge.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/11_0_1/featureConfig/CUCM_BK_FE5123E0_00_cucm-feature-configuration-guide_1101/conference_now.html

Is the first participant the host? or the End User that provide the Conference Now info is the host?

Thanks again

JM

Hall of Fame Master

Whoever enters the PIN number

Whoever enters the PIN number that caller is the host. Your other participants can join before or after the conference starts (PIN is entered) and will not be in a bridge until the host joins.  Sounds to me like your participants were entering the PIN rather than waiting for the host to do so. 

View solution in original post

Beginner

You are right!

You are right!

Thanks for your time and answers Chris, the issue is Layer 8. :)

Have a nice weekend.

JM

Hall of Fame Master

No problem, and thank you for

No problem, and thank you for nice rating.

CreatePlease to create content
Content for Community-Ad
FusionCharts will render here