cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
623
Views
0
Helpful
7
Replies

CSD/CAD 8.5 compatibility with UCCX 10.6

luis_Borja
Level 1
Level 1

Hello, anyone knows if CSD/CAD 8.5 is compatibile with UCCX 10.6?

we have an UCCX 8.5 today, will deploy a 10.6, but I dont know if I will have to desinstall the CSD/CAD 8.5 and install the version 10.5 in agent´s PCs or CSD/CAD 8.5 is supported for UCCX 10.6.

thanks for help.

1 Accepted Solution

Accepted Solutions

Hi Luis,

Once you will upgrade your Uccx, CAD also will be upgraded on Agents pc.

What you have to pay attention is to CAD/Operating System compatibility.

Here is the matrix

http://docwiki.cisco.com/wiki/Unified_CCX_Software_Compatibility_Matrix_for_10.6(1)

HTH

Regards

Carlo

Please rate all helpful posts "The more you help the more you learn"

View solution in original post

7 Replies 7

Hi Luis,

Once you will upgrade your Uccx, CAD also will be upgraded on Agents pc.

What you have to pay attention is to CAD/Operating System compatibility.

Here is the matrix

http://docwiki.cisco.com/wiki/Unified_CCX_Software_Compatibility_Matrix_for_10.6(1)

HTH

Regards

Carlo

Please rate all helpful posts "The more you help the more you learn"

Hi Carlo,

so much tanks for your help, I will upgrade de CSD/CAD software.

regards.

Hi Luis,

you are most welcome.

Please rate useful posts and mark as answered the one the you think solved your query.

Thank you.

Cheers

Carlo

Please rate all helpful posts "The more you help the more you learn"

Please note CAD will only upgrade automatically if you will run Client Configuration Tool. Hence, post upgrading please run the CCT and after that whenever agents will launch CAD/CSD for the first time they will get a prompt to upgrade their desktop clients and it will be upgraded then

Yes CAD 10.6 is not compatible with UCCX 8.5 since both of these had different versions for 8.5 and 10.6 UCCX.

Regards

Deepak

Hi deepak,

Do you have any document about how to do that????

Simply download the Client Configuration Tool from Cisco Unified CCX Administration >> Tools >> Plugins >> Cisco Unified CCX Desktop Suites. Run the tool as Administrator from any PC in the network (same as of UCCX server), put in the UCCX IP Address when it prompts and then the tool will automatically install, no need for manual intervention then.

In case, if you have HA server do it for the secondary server as well. Refer to Running the Unified CCX Desktop Client Configuration Tool section of below document:

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/crs/express_10_6/install/guide/cadx106-installation-guide.pdf

Regards

Deepak

last one, I gess the  CAD 10.6 version is not compatible with UCCX 8.6????

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: