CUBE - IOS 15.1(3)T Media Flow Around command

[Felix Sarayar]

Hello,

I can only manage to configure the media flow around command under a dial-peer.

Router(config-dial-peer)#media ?

  flow-around   The media is to flow around the gateway

  flow-through  The media is to flow through the gateway

  forking       Enable media forking

I wish to configure this command under Voice Service Voip

Router(conf-voi-serv)#media ?

  anti-trombone  Media Anti-trombone

  forking        Enable media forking

  transcoder     Media transcoding functionality

Do I just have to enable it under each dial-peer then?

I have enabled 'mode  border element' and reloaded.

Thanks

Felix

[Harmit Singh · Accepted solution]

Hi Felix,

In Cisco IOS Release 15.1(3)T, support for the  Configured Delayed-Offer to Early-Offer Media Flow-Around feature at the  global and dial-peer level was introduced.

http://www.cisco.com/en/US/docs/ios/voice/cube/configuration/guide/vb-gw-sipsip.html#wp1392896

Looks like you forgot to add "allow-connections sip to sip" under voice service voip. Once you add this, you should have the option to configure this globally.

HTH.

Regards,

Harmit.

[Felix Sarayar]

Thanks Harmit!