CUBE SIP to send different username/passwords?

[mmoulson1]

Hi All,

We are working with a new SIP provider and they have told us that in order to send the correct caller ID we need to send the call to them using a different SIP username/password, basically another SIP account. This account does not need to be registered we just need to send the details with the outgoing call.

I have a SIP-UA configured for incoming and outgoing calling but want to know if it is possible to send a different username and password via a different dial peer that would need to match based on the ANI.

Thanks in advance.

Matt

[Chris Deren]

If you have relatively new IOS version you can send different credentials by adding it to the dial peer configuration that points to this destination.

HTH,

Chris

[mmoulson1]

Hi Chris,

is that with the 'authentication username' command under the dial-peer?

Thanks

Matt

[Chris Deren]

Correct.

HTH,

Chris