CUCM 10.5.(2)SU10 encryption

[abeebvm]

Hi,

As far as I know CUCM 10.5.1.10000-7 does not require an encryption license. Also Release 10.5(2)SU6 requires an encryption license to run the product in mixed mode. But regarding CUCM 10.5.2.22900-12, it is not clearly mentioning any where. Can you please help me to rectify this. If license required, it is showing 0.99$. So how can we obtain it.

Thanks & Regards

Abi

[Nithin Eluvathingal · Accepted solution]

10.5(2)SU10 also use same encryption license.

its a zero cost part number and  you need to reach out to local cisco SE.  You can  also club it with another order if you have. 

[abeebvm]

Hi,

Please note that part no showing is CUCM-PLM-ENC-K9= . This is for 11.5 . Is it same for 10.5.2 as well.

Thanks

[abeebvm · Accepted solution]

Hi,

Thank you Nithin. Please note that part no showing is CUCM-PLM-ENC-K9= . This is for 11.5 . Is it same for 10.5.2 as well

Regards

[Nithin Eluvathingal]

go through below ordering guide.

https://www.cisco.com/c/dam/en/us/products/collateral/unified-communications/unified-communications-manager-callmanager/guide-c07-739476.pdf