CUCM 11.5 hardware support

[waqas sardar]

Dear Team,

CUCM version 11.5 is support hardware c220-M3SBE ?

Please advise with document .

[Jitender Bhandari]

Hi Waqas,

The server itself is EOL

http://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/eos-eol-notice-c51-737442.html

For CUCm 11.5 UCS supported hardware ESXi versions check the link below

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-cisco-unified-communications-manager.html

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/collaboration-virtualization-hardware.html

(Rate if it helps)

JB

[waqas sardar]

We already have c220-M3SBE with cucm 10.5. we are planning to upgrade to version 11.5. 

Is there any hardware issue ?

[Jitender Bhandari]

Hi Waqas,

check the readme for 11.5 OVA, if your server can support the requirement listed in OVA you should be good

http://www.cisco.com/web/software/283088407/133457/CUCM_11.5_VirtualServerTemplate8_v1.1_Readme.pdf

(Rate if it helps)

JB

[Deepak Rawat]

As long as any UCS server shows up in VMWare HCL list and carries a supported CPU model you can use it for UC deployment (CM in this case). Refer below:

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/collaboration-virtualization-hardware.html#servercompatibility

Regards

Deepak