02-13-2012 06:15 AM - edited 03-16-2019 09:33 AM
Guys,
I have been stuck on a problem since last week. Here is the scenario
1. 3 cucm clusters
2. 1 saf forwarder.
3. 1 cucme (internal client to saf forwarder)
I have configured my cucm as external client and they have all registered to the saf forwarder
I have also configured my cucme and its registered as an interenal client to the saf forwarder
When I do a show voice saf dndb all.. I see all the patterns configured on my cucm clusters.
however when I check on RTMT for the learned patterns, all I see is the cucme pattern. None of the 3 cucm seem to have picked up any of the advertised pattern from the other cucm.
I was runnign ios 15.1.4M3, due to this issue i changed to 15.1.3T3 and the issue still exist.
Can any one please advise..quite frustrating to be feeling stucked
02-13-2012 08:50 AM
any thoughts guys?
10-01-2014 04:36 PM
Hello Ayodeji,
Did you ever figure this out? My learn patterns are showing in RTMT either. Running 8.6.2 CUCM/ 15.1 IOS.
HQ-CORP-2#sh voice saf dndb all
Total no. of patterns in db/max allowed : 4/6000
Patterns classified under dialplans (private/global) : 4/0
Informational/Error stats -
Patterns w/ invalid expr detected while add : 0
Patterns duplicated under the same instance : 0
Patterns rejected overall due to max capacity : 0
Attempts to delete a pattern which is invalid : 2
Last successful DB update @ 2014:10:02 00:08:28:450
******** Private Dialplan Partition ********
Pattern - 85212XXX
Primary Trunk-Route(s) ID : 7
Alias-Route(s) Prefix/Strip-Len : +55521555/4
Pattern - 85112XXX
Primary Trunk-Route(s) ID : 8 10
Alias-Route(s) Prefix/Strip-Len : +55511555/4
Pattern - 85223XXX
Primary Trunk-Route(s) ID : 7
Alias-Route(s) Prefix/Strip-Len : +66522555/4
Pattern - 85123XXX
Primary Trunk-Route(s) ID : 8 10
Alias-Route(s) Prefix/Strip-Len : +66512555/4
******** Global (E164) Dialplan Partition ********
- none -
HQ-CORP-2#
10-01-2014 04:38 PM
I meant "are not displaying in RTMT". My bad
10-02-2014 03:02 AM
Hi,
I am sorry I cant remember how I fixed this issue. Its was 3 years ago!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide