CUCM 8.6 with DX80 license?

[J_Vansen_S]

hi all,

We have existing cucm on version 8.6 that we would like to purchase dx80 to register with.

We are currently doing ordering for the dx80 part number

What licenses do i need to order in terms of cucm part number?

i understand that there was a transition of DLU to UCL/CUWL, which is very much confusing

Appreciate if anyone can help me identify the licenses needed

THankS!

[Aman Soi]

Hi,

you need to have min. Enhanced USer Connect License .

http://www.cisco.com/c/en/us/products/collateral/collaboration-endpoints/desktop-collaboration-experience-dx600-series/datasheet-c78-731879.html

regds,

aman

[Terry Cheema]

Adding to my friend Aman's post (+5) -if you are using CUWL - you will need to have CUWL std. If you are unsure of your license model UCL/CUWL you will need to contact GLO: licensing@cisco.com. As there is no way you can figure from CUCM what license model is used.

One more thing the part numbers for CUCM 8.6 are already End of Sale, so you may have some difficulty buying that:

http://www.cisco.com/c/en/us/products/collateral/unified-communications/7800-series-media-convergence-servers/eos-eol-notice-c51-730843.html

-Terry

Please rate all helpful posts.