08-11-2014 09:37 PM - edited 03-16-2019 11:42 PM
We are planning to install ARC in our environment. Just wondering if anyone has a good configuration guide to use as a reference on how to integrate it with CUCM 9.X
Solved! Go to Solution.
08-12-2014 03:40 AM
Hi
Documents are available here: http://www.arcftp.com/ProductRelease/Cisco/Release_6.0/V6.0.0_Arc_Premium_Edition/
Bear in mind it's quite complicated, the interface is tricky even if you know it well, and technically an ARC system should only be installed by an accredited engineer to maintain support etc.
Aaron
Please rate helpful posts..
08-12-2014 12:58 AM
08-12-2014 03:40 AM
Hi
Documents are available here: http://www.arcftp.com/ProductRelease/Cisco/Release_6.0/V6.0.0_Arc_Premium_Edition/
Bear in mind it's quite complicated, the interface is tricky even if you know it well, and technically an ARC system should only be installed by an accredited engineer to maintain support etc.
Aaron
Please rate helpful posts..
08-13-2014 04:04 AM
Thanks guys:)
08-13-2014 04:37 AM
No problem!
Please remember to rate helpful responses and mark threads as 'answered' when appropriate to highlight useful content..
Aaron
08-13-2014 04:42 AM
Just rated then.
Is it possible to have your input on my below post?
https://supportforums.cisco.com/discussion/12277951/cucm-integration-legacy-pbx
thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide