Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi, How to created a secondary DN and to add speed dials to the cisco EX-60 phone. Thanks & Regards,
Our UC520 went down hard and CUE is not firing up. I have tried to shutdown, reset, reload various times and it does not come up. The status shows as "recover from error" or "recover from reset/shutdown" depending on if I just issued a reset or rel...
we have the following set up CUCM ====>SIP TRUNK====>CUBE======>SIP Trunk to ITSP We have contracted for 8 SIP channels. How will the calls route if all 8 channels are full? We have a route group that has the CUBE to ITSP and also an MGCP gateway P...
Hello Guru's -I recently impletemented a medium sized CUCME 9.1 solution in which all users (about 75) are using extension mobility because they change desks often based on the job function they are performing.The site admin requested that the users ...
Hi,I have just installed a cisco IP telephony network using a third party LAN Switch POE. All thnig seems work good, but when i add a expansion module Cisco Unified IP Color Key Expansion Module" to cisco IP phone 9971, the expansion module couldn"t ...
Hi everyone,I'm working with two CME(CME 1 and CME 2) supporting all our phone in a active/stadby redundacy scheme. We need to have a redundacy for our thirdparty phone (X-lite, YeaLink...) to register with CME 2 when CME 1 be down. For this scheme ...
I need configure Track rtr in cisco router 3925previously had a 7200 which supports the RTR is now migrated to a 3900my question is whether the 3900 supports RTR feature orwell if the following command is the evolution (track 1 ip sla 1 reachability)...
We have a group of 7942 phones that are not logging missed calls. Not all phones are affected.
Hi -Search is currently not working otherwise I would have checked in the forums first! We have been using 7965 or 7945 wall mounts for years in our hospital environments; even 6941s on some occasions. We are now expected to meet not only the heigh...
Good day! I want to register a phone 7821. But when I try to add this phone in CUCM, I cannot find it in the list of the phones. I have CUCM version 9.1.2 and according to datasheet this call manager supports phones of series 78XX. What kind of issu...
Hi all, I’m having the following issue, when the customer is having a conference sometimes the 3er person in the call is not hiring the other 2 in the call, This is occurred when the 3er person is called out of the company. What debug can I use to ch...
Hi all; I have one H323 gateway and one CUCM 10.X, as I have two groups of users A, B. how can I configure the system to route the calles as follwoing : Group A will use FXO 1Group B will use FXO 2 any suggestion will be appreciated
Hi, We have setup Expressway and had to add two DNS SRV records on the outside. Our Domain Service Provider doesn't allow to add custom SRV record unfortunately. The _colab-edge cannot be added. Is there any alternative for this ?
Hi,All 7936 IP conference phone the DTMF service is not working through SIP trunk but at the same time all other IP phones (7941, 7941 etc..) are working DTMF through trunk.I have configured MTP also. But still not working for me.My connectivity is C...
dear alli have installed CUE-ISM module and activated the license in evaluation mode, now my CUE is not working i have checked all the configurations, i think ISm evaluation period has expired , attched a screenshot of show license all commnad kindly...
