07-07-2020 10:42 AM
I am trying to integrate our Asterisk PBX setup with CUCM where,
1. CUCM will be connected with the PSTN network
2. Asterisk will be handling IVR and voicemail with inbound SIP trunk from CUCM
3. For transfer of the call to an agent, the outbound SIP trunk from Asterisk to CUCM will be used to connect to the IP phone connected to CUCM.
I have used the below tutorial as a reference for the above integration setup,
https://www.uccollabing.com/cucm-asterisk-trunk-integration/
I have one question though as I am trying this setup for the first time,
Does the transfer of calls from Asterisk to CUCM using the above setup work as expected? Or are there any possible problems with this setup?
It would be really helpful if anybody can guide me with this setup.
Thank You.
07-07-2020 10:57 AM
07-08-2020 12:25 AM
07-07-2020 11:21 AM
I have done exactly the reverse.
Sip integration was straight forward. But you may need to do some fine tuning.
===Please rate all useful posts===
07-08-2020 02:15 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide