08-25-2012 06:46 AM - edited 03-16-2019 12:52 PM
Hi
One question
If you want to rebuilt a cucm and at the new installation you use a different security kye than the previous you got with the back up..Then its any problem with that??Or just when you try to use the restore proccess then cucm will ask you to type the new security kye
Regards
cc
Solved! Go to Solution.
08-25-2012 09:25 AM
First you can only restore to the exact same version that the backup was taken. So if the restore is done on 8.5 it would have to be a backup from 8.5, so it would prompt for a new security password if there is a mismatch.
08-25-2012 07:36 AM
It will prompt you for previous password
Sent from Cisco Technical Support iPhone App
08-25-2012 08:10 AM
You'll be prompted for the "old security password" that was in place when the backup was taken only on CUCM 8.5(1) and later.
08-25-2012 09:05 AM
Hi Joe
it will prompt for the old password ONLY if teh version that i took the backup was 8.5 and later?
For example if the backup was for 6.x and the new security kye is different for the security kye that i had when the backup was placed then it will NOT ask for the previous secutity kye right?
08-25-2012 09:25 AM
First you can only restore to the exact same version that the backup was taken. So if the restore is done on 8.5 it would have to be a backup from 8.5, so it would prompt for a new security password if there is a mismatch.
08-25-2012 09:28 AM
The backup was taken at 6.x version
so it will not prompt for the old security password
Thanks joe
08-25-2012 09:31 AM
Got it, correct it would not prompt for the security password on the DRS page when trying to restore it. In your case you would need to change the security password on the server you are trying to do the restore on to match the security password of the backup file.
08-25-2012 09:36 AM
The version in my case is 6.x
so we are ok
thanks joe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide