cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
719
Views
0
Helpful
2
Replies

CUCM upgrade and rollback

vincehgov
Level 1
Level 1

Does upgrading CUCM also upgrade the CUCM DB?  I'm wondering if it is safe to perform an upgrade and then switch back to using the old partition.  If the DB was upgraded, won't the old version have trouble using it?

Vince

1 Accepted Solution

Accepted Solutions

Hello,

The VOS platform can have two versions (one is active and one is inactive) when you upgrade it will upgrade the DB but not on the active partition , it will be upgraded into the inactive partition , so even if you do the upgrade and you didn't switch the versions , the system will work normal as there is no upgrade happened.

Amer

View solution in original post

2 Replies 2

Hello,

The VOS platform can have two versions (one is active and one is inactive) when you upgrade it will upgrade the DB but not on the active partition , it will be upgraded into the inactive partition , so even if you do the upgrade and you didn't switch the versions , the system will work normal as there is no upgrade happened.

Amer

Great! Thanks.  I saw a common partition and understood it to be the DB... Thanks!