02-13-2014 06:41 AM - edited 03-16-2019 09:44 PM
Hi,
We have an IP telephony setup running on CME 9.x and with CUE 7.X.We are planning to upgrdae the CME to CUCM 9.1 and will retain the CUE as well.
What all the pre requisite have to taken for retain the CUE ?. Can use the same License for CUE?
Regards
Nithin Louis.
02-13-2014 06:43 AM
You have to change the license type from CME to CUCM. You should be able to transfer the licenses, but you have to reach out to the Cisco licensing team.
HTH
Regards,
Yosh
02-13-2014 06:56 AM
Hi Nithin,
You would be able to migerate on the existing license for the CUE, but if you need to purchase more license for voicemail box for example. You will need to buy them from the Cisco Licensing team.
Here is the licensing link for your referece:
https://tools.cisco.com/SWIFT/LicensingUI/Quickstart
Kindly rate the post accordingly.
Regards,
Kevin
02-13-2014 07:08 AM
Hi Nithin,
A couple of extra notes to add to the great info from Yosh & Kevin (+5)
You will need to upgrade CUE to be compatible with CUCM 9.1 as
show below;
Table 2: Cisco Unity Express: Unified CM Versions
Cisco Unity Express Versions | |||||||||||||||||
2.0.x | 2.1.x | 2.2.x | 2.3.1 | 2.3.3 | 3.0.x | 3.1.1 | 3.1.2 | 3.2.1 | 3.2.2 | 7.0.x | 7.1.x | 7.2, 8.0 | 7.3, 8.5 | 7.4, 8.6.1 | 8.6.4 | ||
2.3.2 | 2.3.4 | ||||||||||||||||
Cisco Unified Communications Manager Versions | 3.3(3), 3.3(4), 4.0(1), 4.0(2) | • | • | • | |||||||||||||
4.1(2), 4.1(3) | • | • | • | • | • | • | • | ||||||||||
4.2(1), 4.2(3) | • | • | • | • | • | • | • | • | • | ||||||||
4.3(1), 4.3(2) | • | • | • | • | • | ||||||||||||
5.0(1), 5.0(2), 5.0(3), 5.0(4) | • | • | • | • | • | ||||||||||||
5.1(1), 5.1(2), 5.1(3) | • | • | • | • | • | • | |||||||||||
6.0(1) | • | • | • | • | • | • | • | ||||||||||
6.1 | • | • | • | • | • | • | • | • | • | • | |||||||
7.x | • | • | • | • | • | • | • | • | |||||||||
8.0 | • | • | • | • | |||||||||||||
8.5 | • | • | • | ||||||||||||||
8.6 | • | • | |||||||||||||||
9.0 | • | ||||||||||||||||
NOTE: CUCM version 5.1(1) does not interoperate with CUE version 3.2.x. Before version 5.0, Cisco Unified Communications Manager was known as Cisco Unified CallManager. |
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/compatibility/cuecomp.html
In addition, if you are currently @ CUE 7.0 you will need to move to CSL licenses;
When you upgrade to version 7.1 or later, you must replace your pre-CSL licenses with CSL licenses. You are required to migrate your licenses for mailbox features and port features. If you purchased the optional IVR features, you must also migrate your licenses for the IVR features. The migration procedure for each of these types of licenses are described in a separate section below.
Note If you are upgrading to the same of licensed features as before, the CSL licenses are free.
When you obtain licenses for features for Cisco Unity Express 7.1 or later, the licenses are available only in the increments shown below. The following types of licenses are available:
•Mailboxes (available only in increments of five)
•Ports (available only in increments of two)
•IVR (available only in increments of two)
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel7_1/Licensing/Using_CSL.html
Cheers!
Rob
"Seek it out and ye shall find "
- OneRepublic
02-13-2014 07:14 AM
Great info Rob (+5)
Regards,
Yosh
02-13-2014 07:16 AM
Hey Yosh,
Thanks buddy
Cheers!
Rob
"Seek it out and ye shall find "
- OneRepublic
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide